HP LaserJet 4350dtn Printer "4700 error message" Questions

...4700 Fuser Error Error Message 50.7 ''Fuser Error'' After replacing the fuser, it's still showing the same error message. Try unplugging the printer for 30 mins. You may still have a defective

...error " message obtained while trying to print a big document in ms word. My windows 7 was not genuine (black screen) what could be the problem? But it prints on other small documents and other ...

...4700 color laserjet after I've changed out the fuser several times, any suggestions? could both new fusers be bad? If you replaced with new fuser even getting same error, then check,>Check the ...

...error message 128 MB. No buttons ie menu, tick will do anything. Have turned the printer off, unplugged it, removed the internet cable!! Its not error message, its hanging at memory count. Remove ...

...sensor.ActionTurn the printer off, and turn it on again.Clean the color registration detection sensor above the black print cartridge if the error does not clear.If this message persists, contact

Error message unknown. C Line=0 if printer print engine test could be formatter board

...sensor.Action Turn the printer off, and turn it on again.Clean the color registration detection sensor above the black print cartridge if the error does not clear.If this message persists, contact

error. replaced fuser with same message. Hello Dear , Open the door & pull out the fuser then you will see the 2 no of sencors situated left upper side below the front covel ,clean them with clean

...4700 printer set up to a network. It will print black but not colour We've changed all of the toners including the black. We get no error messages. I've Run the Cartridge Disable ...

...Message: Printer Error Description: 15 Yellow CPR sensor Recommended Action: Turn the printer off and then on, and then check the following itmes Check the connections. Replace the color-registration ...