Question about Office Equipment & Supplies
...is returned from the network interface card. (Example: C:\>ping 192.168.0.128 4. Turn off the main power supply to the print controller and the main body printer, then turn it back on. Chapter
...networks and the machine b. TCP/IP setting failure of the machine c. User network failure d. Main controller PCB failure The detailed check methods are as follows. Checking with Loopback ...
Question about Canon Office Equipment & Supplies
what the error of 000/0000 for canon copier 2220 Fixing film unit,main thermistor,fixing heater,main power supply or DC controller is faulty,To reset the error execute ...
Question about Canon Office Equipment & Supplies
How do i solve an error e000-0000 canon ir 2202 Fixing unit problem.Main thermistir,fixing heater.main power supply or DC controller .To reset error u have to execute it in service ...
...code sc548 Enter SP 5810 (SC code reset), select ?Execute?, select ?close?, exit SP mode then turn main power switch off and on. to enter SP mode press yellow C button press 1 0 7 on numeric keypad ...
error code E000001-0002 E001 0000 The main thermistor detects 250°C or higher. 0001 The main thermistor or the sub thermistor detects overheating (hardware circuit detection). 0002 The sub ...
Question about Cannon Office Equipment & Supplies
...the power OFF/ON, execute the following remedies: ( 1) Check the connection of Flat Cable between Main Controller Board (J5) and Contact Sensor. (2) Replace the Flat Cable between Main Controller ...
I Have Canon 3300 Error Code 000003-00 what to do fo this E003 0000 The main thermistor reading is lower than 140°C when paper is moved. You can try to: To clear the error, execute the following ...
Question about Canon Office Equipment & Supplies
...and then ON for several times, execute the following remedies. (1) Check the connection between the Main Controller PCB and the CIS Unit. (J2) (2) Replace CIS Unit. (3) Check the connection between ...
Question about Konica Minolta Office Equipment & Supplies
...the power OFF/ON, execute the following remedies. (1) Check the connection of Flat Cable between Main Controller Board (J5) and Contact Sensor. (2) Replace the Flat Cable between Main Controller ...
16 questions posted
Usually answered in minutes!
1,023 Questions
924 Questions
417 Questions
321 Questions
302 Questions
