Question about Konica Minolta Office Equipment & Supplies
...Dirty transfer belt contact sensor ? Defective transfer belt contact motor ? Disconnected connector of transfer belt contact sensor or motor ? Disconnected cable 1. Replace the transfer belt contact ...
transfer belt is dirty or dusty as well as transfer rollers. here is what I do first take the transfer belt unit out of the machine, take transfer belt out from the unit, clean inside of transfer belt
...Dirty transfer belt contact sensor Defective transfer belt contact motor Disconnected connector of transfer belt contact sensor or motor 1. Replace the transfer belt contact sensor 2. Replace the ...
Question about Konica Minolta Office Equipment & Supplies
...transfer belt is dirty need to clean the same, any solution for that Remove the transfer belt unit,remove the upper cover and used a vacum cleaner,cleaning under transfer belt cleaning belt
transfer belt and a sensor to detect the mark to make sure that the belt is turning around. The problem could be if the sensor is dirty, the belt is dirty, belt is out of position or damaged(torn), or
dirty,check the high voltage connector for proper connection.If necessary change the image unit or the image transfer belt unit. P -21 : Color shift test pattern failure. Wipe clean the surface of the
Question about Konica Minolta Office Equipment & Supplies
...dirty edges begin to come back, you will need to replace the transfer belt as the wear marks on it are trapping toner and not allowing it to be cleaned properly. Please keep me informed on your ...
...transfer, it is inside main body of machine, maybe is dirty but you can't clean it because whole machine must be disassembled. There is a modification for transfer belt and sensor inside machine ...
...be dirty, the sensor could be dirty, the transfer belt could be damaged, and in some cases the transfer cleaning assy could be at fault. Probably will need a trained technican to fix this
...the transfer belt with a soft cloth, if it is dirty. 2 Change the image transfer belt unit if the transfer belt is damaged. 3 Change the PH unit. 4 Change PRCB. Hope fully not the last two
3 questions posted
Usually answered in minutes!
1,023 Questions
924 Questions
417 Questions
321 Questions
302 Questions