...unable to find the roller to clean. Thanks for your assistance. open cover eject toner and toner flap cover open {spring flap cover} clean drum if your problem not solve so check fuser assy teflon ...
...clean the cartridge head otherwise replacement will be neccessary; however without additional information such as make and model of the printer I am unable to walk you through any specific procedure ...
unable to detect the home. Solution: # Clean CCD unit(internal mirrors & lamp reflector). # clean flat bed glass. Fix back & chk. If not resolved chk CCD ribbon cable, # replace CCD unit.. CCD
Question about HP LaserJet Office Equipment & Supplies
...unable to be read. I have replaced the ink cartridge but it doesn't help Have you cleaned the print heads? There should be a program that came on the drivers disk that includes a "service" tab ...
Question about HP LaserJet Office Equipment & Supplies
...unable to print anything now. remove the catridge, and wipe clean the printer with clen damp cloth and also catridge head a bit and replace be careful not to touch the sensor with your hand and wipe ...
Question about HP LaserJet Office Equipment & Supplies
...unable to make prints No Toner then it prints again.. This could be lower toner, a generic toner cartridge will sometimes produce this, or dirty contacts where the cartridge lays in machine. Look at ...
Question about HP LaserJet Office Equipment & Supplies
...unable to print. I'm running OS X 10.8.2 1. Check any paper jams in side. 2. Check cartridge. 3. Remove back cover, clean paper sensors. 4. Replace Formatter board. I had this problem and ...
Question about HP LaserJet Office Equipment & Supplies
...unable to locate home position- remove the scan glass/ clean and lubricate all rails 2. the ribbon cable has open circuit on tracks- replace the ribbon cable connecting the scanner to printer 3. the ...
Question about HP LaserJet Office Equipment & Supplies
...unable to reach home position within allocated time. you need to remove the glass platten and OIL the rails/drive shaft clearing any dust / rubbish as you go also clean the underside of the glass ...
...causing scanner to be unable to go to home position. Solution would be to disassemble scanner assy and clean optics or replace scanner assembly.Note HP service manual says to replace scanner
212 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions