Konica Minolta bizhub 350 All-In-One Laser Printer "set paper bypass tray" Questions

...5.5x14 in the bypass tray 1 load the paper in the bypass tray 2 in the basics screen touch paper 3 select the button for the bypass tray 4 touch change setting 5 select custom size and program the ...

...paper type and weight INSTEAD of the tray. Set the tray properties first, then print. If you leave it on auto tray it will use the tray that matches your paper type and weight. In your print driver, ...

...paper selection xy need solution bypass working good but in tray showming xy paper setting Select the first paper draw and change settings to plain paper and 81/2x11 paper x and y are for abnormal ...

...paper (thick 3) How do you set the printer to print on 11x17 Thick 3 paper either from tray 1 or the bypass. You can print thick 3 only from bypass tray. Reset your Toners and Imaging units for ...

...MAKE A REALLY LOAD NOISE Check your default on computers, via control panel might be set to default to by pass tray. Also check the paper selection on the copier ensure not defaulted to by pass ...

...bypass. Won't pull from tray 2 evern though there was paper the right size in it. you may have to under configure in your print driver go to acquire settings and that should update the driver so you ...

...how to print different media. Is best to set the tray to auto and then set the paper type. If you have already set up the printer with the correct settings it will pull from that tray

...then press ok, then exit out. Also in the user setting if you press the paper setting make sure that it's set to plain paper. Rotate the sheet 90 degrees. you are gripping it from the wrong ...

...for letter paper in bypass tray,but it an A4 page. when i scan to my pc using ftp it cuts off at top of the page. check default setting with bypass try usually it is letter size change into the ...

...tray in the duplex mode. Weight paper is selected in duplex mode only from the bypass. So you check that the paper in the tray 1 or tray 2 must be plain paper and in duplex mode it can print