...and Faxes. 3. Right-click the icon of the installed printer, and then click Properties. 4. On the Ports tab, click the [Add Port] button. 5. In the Available Printer Ports list, select Standard ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...show in the add remove program) can you help me please? Asma hi after u install u must change ur PORT to a new port form printers and fax + ur printer right click properties ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...install the driver as a local printer then go to the properties of the driver and click on the ports tab and click on add port click on standard tcpip and then new port enter the tcpip address ...
Question about Konica Minolta bizhub Office Equipment & Supplies
...you are 90% of the way there. Now go back to the printer setup screen in windows and click on the "port" tab then on configure port. Make sure the port ip address is the same as the copier and make ...
printer port not saport re-install window, or select the correct port.
Question about Konica Minolta bizhub Office Equipment & Supplies
scanner does not reach e-mail when scanning document did not received into e-mail check that machine is set up with static ip address and correct port mail smtp is port 25. check your mail server
Question about Konica Minolta bizhub Office Equipment & Supplies
we can not fax out but we can recieve faxes. Where should I look to fix this? Make sure your phone line is connected to the "line" port not the "tel" port.
Question about Konica Minolta bizhub Office Equipment & Supplies
...to the network? How do I connect this printer to the network? I see on the router that it's network port is connected, but can't find it through the angry ip port scanner. in printer choose ...
also i have stoped and re startes the printer spool. any other sugestions? Thanks, Stew Change your port to LPR and see if this works. Old Konica copier could not communicate with RAW ports
Question about Konica Minolta bizhub Office Equipment & Supplies
...install the driver as a local printer then go to the properties of the driver and click on the ports tab and click on add port click on standard tcpip and then new port enter the tcpip address ...
1,100 questions posted
Usually answered in minutes!
1,023 Questions
417 Questions
261 Questions
256 Questions
111 Questions