Question about Kenmore Washing Machines
Sears Kenmore series 80 washing machine stops after wash cycle will not drain and go to rinse cycle kenmore series 80 model 20892 Sounds like the lid switch.
Question about Kenmore Washing Machines
...series 80. Also can't get cold water to work, only fills with warm or hot. Are you on well water? turn off the cold water to the washer and clean the screen filter out. do not leave filter out. the ...
...80 series, top loader, 3spd motor, ultra rinse, heavy duty, super capacity plus, quiet pak "The washer does not drain the water out after the wash cycle. It started a month ago not spinning the water ...
Question about Kenmore Washing Machines
80 Series top loading washer--will not stop filling with water at the beginning of the wash cycle and for the rinse cyle. Is there an easy fix or should I purchase a new washer? How much can I Kenmore
Question about Kenmore Washing Machines
80 series machine is not rinsing or spinning. It does start filling the washer with water when I start a cycle but when it comes to the rinse cycle it stops. The lid does make the click sound when you
80 series model 11020802991. It fills runs the cycle, drains and spin. But when it gets to the rinse cycle it stops and won't fill and run the last half of the cycle. I changed the lid switch already.
Series 80 Kenmore wont drain water after it's RINSE cylce including the motor. It's like the TIMER stopped after the RINSE CYCLE. I think it's the timer. does it drain after the wash cycle? if it does
Question about Kenmore Washing Machines
...80 Series Hvy Dty Washer? How do I check and replace the "water level sensor" on my Kenmore 80 Series Hvy Dty Washer? Water will not shut off on while filling the drum on any water level selection. ...
Question about Kenmore Washing Machines
...series 80 top loader. Will go through wash sequence, then stop at rinse step and ony click and hum. I can manually advance the control knob to the Spin step, and the unit will complete the cycle, ...
Question about Kenmore Washing Machines
...80 SERIES, GOES TO SPIN CYCLE, SPINNING AND SPRAYING WATER BUT STOPS ABRUPTLY AND STARTS TO FILL THE TUB WITH WATER AGAIN. WHAT COULD BE THE PROBLEM? Are you sure you don't have a second rinse button ...
1,909 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,023 Questions
908 Questions