HP Officejet 6500 Wireless All-in-One InkJet Printer "lights flashing turn off" Questions

...flashing all the lights on the printer console. At first we needed to turn it off then turn it back on to fix the flashing light problem, so that the printer would work. Now when we turn it off, it ...

...lights are flashing and mechine says turn off and on My hp officejet 6500 flashes all its lights and tells me to turn it off and back on again.When I do this it just continues to flash and say the ...

Lights keep flashing when printer is turned on The question is what light is flashing? One thing you can do is turn your system off. then unplug your system from your wall outlet...wait 15-30 seconds.

...flashing and screen is saying busy An envelope got jammed and after removing it from the back of printer I canceled the print job, but green light continues to flash and I can't get it to ...

...lights on printer flashing All of the lights on my d135 keep flashing very quickly with a message to turn off the printer. What is that? What do I need to do? Is the cartridge moving not blocked? ...

...lights flash like crazy on powering up; diagnostic says "turn power off & on" I have an HP aio 7710, actually, and today i unplugged it for awhile. when i plugged it back in (it plugs into a power ...

...Flashing lights I have tried reinstalling the printer but I can't get it to work. Hi If you find the lights flashing, we could try resetting the printer.I have explained the reset procedures below ...

...lights are blinking and it wont reset. Hi Lets try all factory resets, that will resolve this issue. PARTIAL RESET:- Unplug the printer power cable while its ON, press and hold # and 3 button and ...

...flashing, printer will not turn on. When I plug in my printer, the LCD display comes on, and the printer begins to power up. Then the display turns itself off, and the LED next to the memory card ...

...lights flash and it instructs to turn off and on. When that is done it does it all over again. You probably have a bad scanner unit. It's not economical to have it repaired. I change the button ...