...CG-550. Needle hits a bottom plate. All thread and bobbin removed. Took the feed cover off. Do not see the problem. Possible bent or wrong needle. If ok, check the zig-zag mechanism to see if it has ...
...cg-550 c need the stitching sequinces or suggestions on why my bobbin side thread is largely looping. I have checked my threadng. Have a look at this website. If they do not have the manual you want ...
CG-500/550.. The metal plate covering the bobbin, keeps popping up when I sew anything....I took the two little screws holding that little surrounding the bobbin holder off the other day, and lost one
...CG-550. When I try and sew anything, the needle hits something inside where the bobbin is. The little black casing holing the bobbin keeps moving all over the place, I slip back the bobbin silver ...
...CG 550 The metal plate covering the bobbin, keeps popping up when I sew anything....I took the two little screws holding that little black plate surrounding the bobbin holder off the other day, and ...
CG 550 The metal plate covering the bobbin, keeps popping up when I sew anything....I took the two little screws holding that little surrounding the bobbin holder off the other day, and lost one screw
...cg-500/550 I just had this same problem and although i could not find the answer online, I managed to fix it.If you look at the bobbin case there are 3 different tabs sticking out.First you need to ...
Question about Singer Sewing Machines
...CG 550 Top thread keeps wraping around the bobbin and jam I don't know what I am doing wrong...After I thread the machine either two things happen... the top thread wraps around the bobbin and ...
301 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
263 Questions
235 Questions
