Question about Sewing Machines
...set the rotary hook timing on a Tajima Sai 8 needle embroidery machine, you need to follow these steps: Disconnect the power source to ensure safety. Locate the rotary hook and hook timing adjustment ...
timing a viking 990 Hi. Can you tell me how to time the rotary hook on a viking 990 sewing machine? It has a vertical hook. Thank You, Karen Williamson [email protected] Impossible to explain how to ...
Question about Sewing Machines
...hook timing you don't the timing is set by the needle position not the hook the crank that operates the needle is adjustable and is set properly when the needle eye is just at the hook on the up ...
the rest of the bobbin Hits the needle, then it is a timing issue! Loosen the 2 set screws behind the bobbin to adjust the timing so that the neddle is up when the wider part of bobbin holder comes by
...is just barely below the tip of the hook. 3) Check feed timing. Set the stitch length to the longest stitch. The needle should enter the fabric just as the teeth drop below the surface of the
Question about Singer Sewing Machines
...timing is mechanically set. If all you used was your fingers, you did not change the timing. First, just relax. There are a lot of almost right ways for the bobbin case to set into the hook. Second, ...
...set the proper position. Retighten adjusting screws. Some models have timing belts that control the timing of the sewing machine. Look for a belt connected on each with to drive ...
timing problem? Remove the bobbin case and unthread the machine. Ensure that a new needle is inserted all the way up into the needle clamp. Set the machine for straight stitch, center needle position.
Question about Singer Sewing Machines
...set the hook timing on my 112w115 two needle singer There are a lot of web sites and videos on the internet with instructions on setting the needle/hook timing. need help with the timing Sewing ...
...set the hook....yes they can jump timing and this is an unfortunate condition as balance is critical in the hook area... at 5500spm the company could not install a permanent fix ...yes it is quick if ...
301 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
263 Questions
235 Questions