Singer 5050 Mechanical Sewing Machine "bobbin thread tangled" Questions

...bobbin thread tangles, tried new bobbin, cleaned under plate, needle is straight, what to do? bobbin thread tangles up. Tried new bobbin, cleaned under plate, needle new and straight, foot installed ...

...thread. After cleaning the bobbin case, insert the bobbin case properly. If the needle is bent or broken, replace the needle.Then, thread the upper thread properly, and continue the ...

...it in place, power up your machine. Keep holding the thread as you begin spooling the bobbin. Let go of the thread once the bobbin starts to spin a few rounds and the thread should not get

bobbin thread continues to knot up and tangle regardless of tension or material used Have you replaced the needle with a new one? Your needle may be bent or in wrong, or the wrong size. You may have a

bobbin. The thread from the bobbin side is a tangled mess when I stitch. The top looks fine, but the seam falls apart easily and the backside is all tangled. I cleaned underneath the bobbin holder but

...Thread and Bobbin Thread I was smoothly sewing until the bobbin thread was tangled. I pulled out the bobbin case and removed the tangled thread from within. When I am trying to start sewing again, I ...

...bobbin thread gets tangled while sewing the lower bobbin thread is just getting knotted and tangled. Tried winding bobbin again and cleaning inside? try changing the needle --make sure the needle is ...

...bobbin thread comes up and the directions tell me to pull the "tail" to the side, so I do. I work the foot pedal and about three stitches later it stops. I open the shuttle race cover and pull the ...

...bobbin thread that's getting tangled, and I can't figure out why, or how to fix it. Any ideas? It could be that the bobbin is being put in upside down check to make sure that you do not need a bobbin ...

...bobbin thread will not pull up and when trying to the needle seems like it gets stuck down there It sounds like you haven't threaded the bobbin thread correctly. Remove bobbin, bobbin case. If it is ...