GE Profile Spectra JGBP90 Gas Kitchen Range "oven door message" Questions

oven, after the cleaning process the door is still locked. It's beeping and error message E1 F5 I have a electric whirlpool self cleaning oven, after the cleaning process the door is still locked. It&

oven door locked and oven won't turn on. I turned circuit breaker on/ off as per a previous post which took away error message, unlocked oven do jennair jer8855 range was beeping , had f9 message,

...switch or a defective latch assy, is the oven light going out when door is closed??? and depending on model do you have to manually lock the door?? (there would be a handle atop the door if

oven door remains locked after using the oven cleaning feature I used the oven clean feature which automatically locks the oven door while cleaning. Hours after the cleaning is complete, the oven door

...oven door will not unlock after the self-clean cycle was run. Error code - E1 - F5. The reappears after we press Cancel. Anyone know what the error code means, or what to do to release the lock? What ...

...Oven door latch error code. The oven door latched but the control board did not receive a signal that the door was latched. The only time that the latch is used is during the cleaning cycle. KENMORE ...

...door is already unlocked. We had the oven on "self-clean" and were cleaning the oven. Now that we are finished, we cannot bake. Anytime you push the "bake" button, the panel flashes a message - ...

...oven door I have a whirlpool gas range SF387LEGW7, my wife accidentally hit the clean button so she hit cancel. The stove made a few clicking noises by the oven door. She broiled some food then the ...

...oven door is locked shut on an Amana AGR5630BDW. I keep getting F1 beeping error message. How can I unlock the door? I've tried disconnecting all cables from back of sensor panel but no luck. Oven is ...

...oven door and hold the door switch plunger in while you try these things. Put the control into clean for 5 minutes then cancel clean. You must hold the door switch plunger in for the 5 minutes. Try ...