Patton POH2520-U Oil Filled Radiator Heater "used fans" Questions

...meter a good single battery in new condition reads 1.62volts dc 1.5 vdc is almost dead, a good used battery reads 1.58 to 1.6 vdc below 1.58 vdc is weak battery and 1.48 vdc is usually totally ...

Im on my 2nd big buddy and both of them the fan has gone out, the first on went in a week, and this one last a couple of months. fans 1. oil the bearings,sae 30 or wd40 for places you cant get into. ...

...fan switch in the "ON" position, the furnace operates the fan in "HI" speed, the same speed used for cooling mode. You may have a blower moter that is starting to short. I would recommend ...

Why does a pilot light go out,but the fan keeps running? I have a Dayton Heater Model 3E233 and the pilot light keeps going out ,but the fan continues to run. Just changed the thermo-couple. some ...

fan speed to hi The high speed on the fan should only run in AC. The med speed should be used for heat. The black wire on the fan motor is high speed. See if the black wire is connected to the fan ...

i bought a honeywell he360 humidifer where is the best place to wire it to furnace i would wire it into the fan circuit to where evertime the fan itself comes on the humidifier will also come on... ...

The fan making a noise when in use how can this be fixed? When the heater is in use the fan will suddenly start making a noise like vibration and over time it has progressively got worst to the point ...

...filters, restricted air flow due to weak blower motor capacitor and or fan motor, kinked ducting if used can also cause a high limit event. In some cases the limit control and or fan control may need ...

blower motor not coming on for electric heater Talk about a misnomer? Electric heat works way diff than gas heating. On electric heat multiple strips and a fan of course. But if they all come on at ...

blower fan connection need with connecting the electric heat what do i need to connect the blower fan up on my POWERMATIC WOOD/ELECTRIC SPACE SAVER .I am not using the elctric heat section,wood only.I