Culligan Sediment Water Filter "replace softener" Questions

...trap, floor drain)?  If the hose came off by the connection for the salt tank it should be replaced.  If you don't know, unplug the softener for now or it may flood again and call ...

...some debris gets stuck and causes softener to run to the drain. The seal pack assembly needs to be replaced. If you are handy, you can do this. It takes about 1/2 hour for a novice. Parts are only ...

...before overheating (but that's sometimey) i unplug coolant temp sender and fans come on high so i replaced it but problem still consists. I checked voltage through wiring no voltage at the wires ...

...softener is inoperative and is displaying ''E1'' in the status window. There is also a lot of calcium build up around the time clock. Serial #63282704G157 Culligan Medallist plus series 30 & 45 ...

...with softener/conditioner in service the outlet manifold is probably plugged. This would need to be replaced or cleaned by a service tech and determine why it plugged (sediment)? If there is a ...

...softener is trickling to the drain it needs the sealpack replaced. This is the main piston and seals all as on unit. There is a bad seal causing water to bypass it and run to drain. Sealpacks are ...

...very good before this happened either. The main piston/sealpack is frozen up and needs to be replaced. If you are handy there is retrofit kit to repair this and prevent piston shaft from ...

...If unit continues run it has a bad seal pack assembly in the valve and it would need to be replaced. Or if it is stuck in backwash cycle this may home out the board and return valve to ...

softener filter The filter housing will have either a shut off valve before and after the housing or a valve on top of the housing that turns (Black).Shutoffs before and after.1. Turn both valves off2