Canon PIXMA MP980 All-In-One InkJet Printer "absorber pad full" Questions

what does it mean when your printer is saying ink absorber is full ink absorber pads in bottom of printer have become full of waste ink. would need ink absorber pads and know how to reset counters

...pad and place it inside the printer over the ink absorber on the far left hand side of the printer to soak up the excess ink. You may need to change the absorbent tissue a few times. Then repeat the ...

...clean then some ink fall under pad this pad is full ink then machine say ink absorber tank is full you go to aservice centre only support printer canon. Thy clean wast tank and reset your ...

...absorber full There are two possible reasons for an error ink absorber full. First, is the ink absorber pads is actually full of waste ink and needs cleaning. The second is to reset the printer to ...

...absorber full. First, is the ink absorber pads is actually full of waste ink and needs cleaning. The second is to reset the printer to clear the error and let the printer print again. Clean the two ...

...absorber full. First, is the ink absorber pads is actually full of waste ink and needs cleaning. The second is to reset the printer to clear the error and let the printer print again. Clean the two ...

...absorber is full how do i fix this Hi It is a pad inside your printer witch absorbs the left over ink when it cleans itself this pad is full there only one way and that is to open it up with a screw ...

...pad. Lift the cover to expose the ink cartridges and place this pad over the ink absorber on the LHS of the printer so the pad soaks up the wet ink. Repeat until the absorber is nearly dry. Look

...absorber full, or platen waste ink absorber full WHAT MUST DO? I am told that this will reset your counter and eliminate the full absorber warning that you are getting. Cleaning the pads is messy, ...

...absorber pad then clean it up by removing the excesses ink from the pad ,follow the step below to do this STEP 1: - Disconnect printer from AC power supply STEP 2: - Press and HOLD the POWER button, ...