Haier HTQ21JABWW Top Freezer Refrigerator "setting temp" Questions

...WW? Press and hold temp up button then press quick freeze button at the same time, your temp settings will be displayed on display for fridge and freezer, fridge temp is + and freezer -, cycle ...

...setting thats normaly in the middle , wait 24 hours for temps to equalize and check temp in freezer with an accurate thermometer it should be -10 to +10 deg. Far. to adjust temp move dial up or down ...

The refrigerator temp keeps returning to 65 after I set it at 34. After you set the temp (at 34) the refrigerator display changes to show the current temp inside your refrig. (apparently it was 65) As

...temp control to the warmest setting and the cooler is still freezing product, you will need to have the cooler serviced be a refrigeration tech. It will most likely be a bad control but there may be ...

...temp will go to new setting but when set light goes off it reverts back to 14 and 74. note: 74 is above the max setting of 47. please help. Unplug it for 2 minutes to do a hard reset. If it does not ...

...temp is only displayed while you are setting it. It maybe in defrost and you would see higher that set temp valves, if after an hour you do not see the temp come back down to normal operating values ...

Set temp to 46 deg(highest for fridge), temp ranges from 30 to 46 deg inside model gi5fsaxvy02, french double door with temp set at 46 deg, i used the thermometer to measure temp on the bottom ...

will not let me adjust the temp. beeps and resets when temp is adjusted It would of been helpful to have the model number so I am guessing what yo have, with that being said. One you have adjusted the

temp setting is on 4 for both the freezer and refrig. Which way do we set the temp controls to warm up the temp? Is the lower setting warm or cold? Good day, The higher the number the colder the temp.

samsung srs2026 Reaches set temp but doesn't maintain temp after it falls. Temp reading on display stays at set temp even when temp falls. Have to turn power off and back on for it to read actual ...