contact with the coils. If the brushes are too worn out, of course they won't touch the coils neither and your motor will not run. You can purchased new brushes on Ebay if they need to be replaced
...Won't turn on. Smoke came up after it stopped, not a lot, but enough that I'm pretty sure the motor is burned up. bread is very tuff on mixers. always buy the strongest mixer that you ...
...won't turn on . Obtain a copy of the Repair Part List for your model from Kitchenaid.com. Download a Copy of the Kitchenaid Service manual. ...
...connections, burnt or damaged components. If they seem to look OK, re-assemble them and test the mixer. If the motor still won't run, then I might suspect a defective Phase Control Board
...won't turn, but motor is running. Hi, Did you push the beater in so that it clicks. If all is good there, gear box maybe at fault or jammed. Take it to a service center for repair. If you are ...
...is designed into the part so if the Mixer gets overloaded, it won't burn out the motor. Which is odd if you have the reset switch like I do. Part# 4162897 You can buy it online at ...
...won't turn on. Can you help? Get A Copy of the Repair Parts List from Kitchenaid.com Make sure the Speed Lever and and the Speed Link are in place and operating smoothly. The two Large black ...
won?t get any ?juice? to the motor. See the illustration below: I'd suggest removing them again and making sure the concave contact face rests completely on the armature?s commutator. If you've turned
...wonâ??t get any â??juiceâ?? to the motor. See the illustration below: If you've turned a brush 90 degrees too much, it wonâ??t seat properly and youâ??ll get no power to the ...
...won't run. If the mixer died completely and no noise at all comes from the machine you need one of three things. 1. New brushes2. new speed control switch3. a new motor. The KP26 is a 6 quart ...
614 questions posted
Usually answered in minutes!
357 Questions
285 Questions
205 Questions
183 Questions
89 Questions