Food Mixers - Recent Questions, Troubleshooting & Support


Because of the very high voltage on the output of the Inverter drive, I do not want to be responsible for your injury or death from you servicing this machine without proper training.

Hobart HL600... | Answered 3 days ago


Sorry so late but the reason you need the kit is because the potentiometer (the knob that selects the time) is no longer part of the timer board.You need the pot,and board.I'm a hobart tech,if any other questions let me know.

Hobart A200... | Answered 3 days ago


If you have 24 VAC to the timer board and still have no display, then you need a new timer board.

Hobart H600... | Answered 3 days ago


Did you solve your problem?I'm a hobart tech but havent been on this site lately.

Hobart H600... | Answered 3 days ago


that fault is a b_gd.there are 10 things that can cause this.1.start sw.momentary contacts not closing. 2.stop sw. contacts open. 3.bowl guard sw. open or malfunction(b_gd)displayed on timer.4.contactor 1con malfunction.5.timerboard malfunction.6.wiring incorrect from sr drive to motor or 1con.7.sr drive malfunction 8.1 con monitor from control drive disconnected from contactor coil9.encoder malfunction 10.motor malfunction. hopefully just your bowl guard switch is no good. hope this helps, dont forget to vote, monomoy

Hobart HL600... | Answered 3 days ago


one would assume that if you get a 40 qt. bowl. you will most likely increase your batch size, correct, i would make do with what you have, that mixer was designed for a 30 qt. bowl, not a 40, hence the d 340 model, but the choice is yours. i would stay with what you have, monomoy

Food Mixers | Answered 3 days ago


this mixer came out of a pizza hut in illnois, looks like the manufacture date is june 1994, dont forget to vote, hope this helps, monomoy

Hobart H600... | Answered 3 days ago


Hiya,

It sounds like you need to adjust the head height on your mixer.
I have added a link below for our help page on adjusting your mixers head height.

https://www.youtube.com/watch?v=bmg8SVldZbs

I hope this helps you :)

KitchenAid... | Answered on Oct 17, 2019


Hiya,

Sorry to hear you are having trouble with your mixer.

It may be that your motor brushes are worn down or have been put in incorrectly.

I have added a link below for our help page on replacing your motor brushes:

https://www.youtube.com/watch?v=5YuS3atXR0M

I have also added a link below if you wish to purchase a set of new motor brushes:

6778011 KABrushSet KitchenAid Mixer Motor Brush Set (2 x W10380496 brushes) https://secure.kaparts.co.uk/sku/6778011

I hope this helps you :)

KitchenAid... | Answered on Oct 17, 2019


Hiya,

I am sorry to hear you are having problems with your lever.

I have added a link below for our help page on replacing your speed lever:

https://www.youtube.com/watch?v=y97KT98vpJ0

I have also added a link below if you wish to purchase a new speed lever:

9709276 KitchenAid Tilt Head Stand Mixer Part (also 5qt bowl lift) Speed Lever Black https://secure.kaparts.co.uk/sku/9709276

I hope this helps you :)

KitchenAid KSM90... | Answered on Oct 17, 2019


Hello there,

We do provide a conversion kit to assist you with your job. Please see below the link for your perusal:

KSM150CONVUK KitchenAid Conversion Kit for KSM150 to 220v/230v/240v with UK Plug https://secure.kaparts.co.uk/sku/KSM150CONVUK

KitchenAid... | Answered on Oct 09, 2019


Hello there,

Sorry to hear you are experiencing an issue with your appliance. If you have a KitchenAid Tilthead mixer, please see the attached link with

KitchenAid Food... | Answered on Oct 09, 2019


Hello there,

Sorry to hear you are experiencing an issue with your appliance, it sounds like you might need a new tilt lever. Please see below the help video for your perusal as well as quote for a replacement one, should it need replacing:

4176024 KitchenAid Lever-Latch Black was 9709280, 9709267 tilt https://secure.kaparts.co.uk/sku/4176024

KitchenAid... | Answered on Oct 09, 2019

Not finding what you are looking for?
Food Mixers Logo

9,331 questions posted

Ask a Question

Usually answered in minutes!

Top Food Mixers Experts

Bruce Showalter

Level 2 Expert

133 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Ross Keen

Level 3 Expert

1355 Answers

Are you a Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...