Lutron Diva Single-Pole Dimmer, White "installing dimmers box" Questions

...box and the other to the wire going to the incandesant light fixture. (Standard dimmers cannot be used with CFL type bulbs). You should be working fine! Remember to turn off the power to the wiring ...

Voltage on dimmer switch constant I am trying to install a fan with light to a pre-installed fan box connected to a wall switch and a dimmer.  But when I check voltage on wires, the red wire ...

I have installed a 2-way dimmer switch in my dining room. I was able to install it and it works great. However, on the other side of the wall where I installed the switch, I have another single way ...

bedroom light not wired correctly...need help. new installation with supply power 14-2 wire (blk, wht and grd) in box with 14-2 wire (blk, wht and grd) going to the light. seems simple but dimmer ...

...dimmers: The Black dimmer wire connects to black hot wire coming from breaker (122V line) The red dimmer wire connects to Load (wire going to chandelier) The wall red wire that is capped could be a ...

...installing a new chandelier. The chandelier works, but a neighboring room does not. When I put the 600 watt back in, the other room works again. I'm not leaving any wires out (there are 3 + ground, ...

I installed a dimmer switch it worked for a few days Now it has just quit. I have the black to the black hot wire in the wall. Red wire on the same side of the switch to the other black in the wall ...

...dimmers just like you would a standard 3-way switch. The only thing I caution you, make sure that the blue screw on the dimmer is connected to one of the traveller wires going to the next switch box. ...

...dimmers don't always account for the possibility of saturating magnetic motor loads or taking out the dimmer if the fan gets locked up - that can legitimately be a safety issue. All that said, I'll ...

...dimmers to match correct load rating.Take out of son's allowance, and make the future electrical genius help read small print on instructions and install new device.Turn power off to replace ...