1991 Chevrolet Sportvan Logo

Related Topics:

Posted on Aug 01, 2008

Serpentine belt replace serpintine belt

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 59 Answers
  • Posted on Aug 01, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Jun 26, 2008
Answers
59
Questions
0
Helped
42709
Points
84

Hi
It's not as bad as it looks, it's only one bolt that you need to loosen and pull with a braker bar and replace the belt. Email me wit the car make and model and I will send you instructions.
Eddie Rentas
Tupper Lake NY

  • Anonymous Aug 02, 2008

    Hello

    Find the belt tensioner and using a socket and ratchet move the tensioner wheel and arm upwards just enough to slip the belt out from under the tensioner wheel.
    Make note of routing pattern for old belt so new belt can be installed exactly the same.

    Eddie Rentas
    Tupper Lake NY

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2004 Taurus serpentine 3.0diagram

Robert, Serpentine belt diagram. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How To Install Replace Serpentine Belt Ford Taurus 3 0L V6 1AAuto com
2003 Ford Taurus V6 3 0L Serpentine Belt Diagrams serpentinebelthq com
2003 Ford Taurus Belt Diagram Am Having Problem Getting My
0helpful
1answer

New serpintine belt breaks on 1999 dodge durango

possibly broken water pump, then belt gets loose, hits the fan blade...
4helpful
1answer

Replacing serpentine accessory belt. Is it necessary to remove motor mounting brace to remove and install new serpentine belt?

From my understanding I think you have to remove the motor mount and mount the engine to remove it because I have been asking different mechanics about the serpintine belt on my 1998 Buick Lasabre.
0helpful
1answer

How to change serpintine belt 2002 3.5 aurora

Use a 3/8" breaker bar to move the belt tensioner. While holding pressure on the tensioner, remove the serpentine belt from any of the pulleys. Gently release pressure from the tensioner. Remove the old belt and replace with the new one. Reapply pressure to the tensioner and pop the belt over the last pulley.
0helpful
1answer

Can't figure out how to put on serpintine belt

c48321a.gif
Serpentine drive belt routing-1995-97 2.2L engine

ffe8c04.gif
Serpentine drive belt routing-2.3L and 2.4L engine
0helpful
1answer

I need a serpintine routing diagram please for a 2002 ford windstar.

2002 FORD TRUCK WINDSTAR 3.8L SFI 6CYL REPAIR GUIDE

Drive Belt Routings

12ff91b.jpg

Fig. Accessory drive belt routing-3.0L engine


e11fada.jpg

Fig. Accessory serpentine belt routing-3.0L engine


22c7396.jpg

Fig. Accessory serpentine belt routing-3.8L engine


I hope help you with this. Good luck.

1helpful
1answer

Serpintine belt replacement

OK, click on the link below to be directed to a full size photo of your belt routing diagram.

2000 Grand caravan Serpentine Belt Routing

Please rate and have a great day:)
1helpful
1answer

Serpentine belt replacement

go to gates.com and click on the Part Locator & Interchange link on the left, enter your vehicle information, look down and click the camera icon next to the serpintine belt, this is a diagram of how to route it. These engines have a tensioner pulley, it has a 3/8" square drive hole in it to release the tension on the belt, I start at the crankshaft and loop around leaving the tensioner for last, hope this helps, let me know
0helpful
1answer

Replace the serpentine belt

First note the route of the belt. make a drawing.
Adjustments are made by moving the power steering pump. far right of belt system.
loosen top fixed bolt above center of drive wheel on p/s pump.
loosen bolt below drive wheel on p/s pump.
Push p/s pump to the left to loosen belt.
Remove old belt .replace following route of your drawing.
move p/s pump to right .
top of belt should have 1/2 inch deflection.
tighten bolts
The end

If you dont have belt route mail me at
[email protected]
for drawing

Good luck .Andy Bartolo
2helpful
2answers

Serpintine belt

This link will take you to a picture of the diagram. If the link doesn't work contact me and I can email you the picture directly.

http://autorepair.about.com/library/illustrations/bl506a-lib.htm
Not finding what you are looking for?

194 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...