You make answering very difficult because you do not give specific information
the excel comes in ser X1 (1985-1989), X2(1990-1995), X3(1994-2000) depending on the year
the engine capacity is missing so 1.3 LT engines are single over head cam and 1.6LT engines are double head cam
to make matters worse
the 1.3LT ( engine family G4EH) is single over head cam
the 1.5 Lt ( G4EK is a SOHC
the 1.5LT ( G4FK) is a DOHC
and the 1.6LT( G4ED) is a DOHC
Now you can see the difficulty in giving you a definitive answer
Why don't you simply ring the shop and ask them to check for you
Yes and the eighth digit is the engine code.
SOURCE: Correct way to align timing marks
hi -- the timing marks on a twin cam are tricky!! heres how- turn the motor over to tdc on the bottom pulley,this will align two marks on the lower cog-----now on the top cog,it has an obvious mark near the teeth-- well disregard this for now!! the cog has a hole in it,in one of the spokes,well this goes at 12 o,clock and lines up with a mark you will see on the housing! now if you are right you will see the mark near the teeth is at around 4,oclock---i just did one and it is right--cheers
SOURCE: I cannot remove the CDplayer from my 1999 TWIN CAM HYUNDAI EXCEL
The trick is, grow a ****. That helps
SOURCE: hyundai excel twin cam manual clutch repair
If you don't have the service manual specifically for the vehicle and the proper tools to do the task, i'd suggest taking it to the shop instead. It wouldn't be worth all the trouble. But in case your in need of a service manual, may i suggest going to ebay and checking to see if someone is selling the manual on cd for 99 cents. It may sound like a scam or something because service manuals on cd at the dealer average $150-$200. But if one is offering the manual for 99 cents, buy it. It's actually like a copy of the one they sell at the dealership, so before you start on that difficult task, i advise in purchasing a service manual. If they don't have it on ebay, go to your local auto parts store and buy one for $25. The name would be either Haynes or Chilton. Good luck.
SOURCE: diagram or advise the timing settings
The timing is 1-3-4-2, sorry i dont have a diagram. good luck
97 views
Usually answered in minutes!
×