Code p 0756 refers to shift solenoid (SS) B ---performance or stuck off===causes ---wiring --- shift solenoid
the exact problem is that the shift solenoid is inoperative from either loose harness connection, corroded connection or failed shift solenoid B
if the wiring is good , replace shift solenoid B
Hi,there could be a problem with the sift solinoid,if you look on u-tube there is a vidio there showing you how to test it,good luck hope this was some help.
SOURCE: auto tranny
it could be your torque converter or transmission shift linkage or even your transmission ecu check it following troubleshooting section in repair manual ex:haynes or chiltons
SOURCE: transmisson car stay at 3rd gear
Thats a common issue with the TCM when is about to go out.. Once you get to 3rd gear take you foot off the pedal the if you let go of the pedal and slowly accelerate it should go in 3rd gear. You can order a unit from this site with a lifetime warranty. Good Luck and the HONDA on the road.
http://www.onlineauction.com/index.php?page=auction:view_item&auction_id=1092906
SOURCE: changing my shift solonoids
these are a pain the best way to remove the pan is by removing the 2 bolt from the trans mount and jack up the transmission try to sneak the pan out that way it is tight! worst case the transmission cross member needs to be removed any other way results in damage to those solenoids if you already have a broken1 to remove it there is a u shaped clip and a plug that hold it to the valve body good luck!
SOURCE: vw passat auto matic hard shift to first when
The gearbox must be serviced: the oil is burned and aged and the filter clogged - replace both.
Testimonial: "Top man cheers for a quick respose. "
782 views
Usually answered in minutes!
×