The fire order and on ,84 cross fire corrvette please show diagram of of wire placement on both motor and distributor

Cadillac 425 engine firing order is 1 - 5 - 6 - 3 - 4 -2 - 7 - 8
Distributor rotation is clockwise .

go google and type in ---firing order for chev motors-- there are pages with the firing orders and rotor direction

This should do it.
You can also do an internet search for a standard 350 Chevy engine.
The firing order is 1-8-4-3-6-5-7-2
The order is the same for engines from the mid 1990s back to the late 1970s.

1984 Jeep Cherokee V-6 VIN "W"




Hope this helps (remember to rate and comment this answer)..

See Figures 1, 2, 3 and 4
To avoid confusion, remove and tag the spark plug wires one at a time, for replacement.
If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes, to reflect how your engine is wired.

Fig. Fig. 1: 2.5L Engine - Engine firing order: 1-3-4-2- Distributor Rotation: Clockwise

Fig. Fig. 2: 2.8L Engine - Engine firing order: 1-2-3-4-5- Distributor Rotation: Clockwise

Fig. Fig. 3: 3.1L Engine - Engine firing order: 1-2-3-4-5-6- Distributor Rotation: Clockwise

Fig. Fig. 4: 5.0L and 5.7L (VIN 8) Engines - Engine firing order: 1-8-4-3-6-5-7-2- Distributor Rotation: Clockwise
Back to Top

Firing Orders
NOTE: To avoid confusion, remove and tag the spark plug wires one at a
time, for replacement.

If a distributor is not keyed for installation with only one orientation, it
could have been removed and installed improperly and then rewired. The new
wiring arrangement would maintain the correct firing order, but could change the
relative placement of the plug towers in relation to the engine. For this reason
it is imperative that you label all wires before disconnecting any of them.
Also, before removal, compare the current wiring with the accompanying
illustrations. If the current wiring does not match, make notes of the current
plug wire locations and orientation of the distributor cap.

5.7L Engine
1-8-4-3-6-5-7-2

7.4L Engine
1-8-4-3-6-5-7-2

Here is a firing order diagram for that vehicle and engine, and let me know if you require any further assistance.

FIRING ORDERS NOTE: To avoid confusion, remove and tag the spark plug wires one at a time, for replacement. If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes in your book to reflect how your engine is wired. Fig. 1: 300 cid (4.9L) inline six-cylinder engines Firing order: 1-5-3-6-2-4 Distributor rotation: Clockwise
Fig. 2: 232 cid (3.8L) V6 engine Firing order: 1-4-2-5-3-6 Distributor rotation: Counterclockwise
Fig. 3: 255 cid (4.2L), 302 cid (5.0L), 360 cid (5.9L), 390 cid (6.5L), 460 cid (7.5L) V8 engines Firing order: 1-5-4-2-6-3-7-8 Distributor rotation: Counterclockwise
Fig. 4: 351 cid W & M (5.8L), 400 (6.6L) engines Firing order: 1-3-7-2-6-5-4-8 Distributor rotation: Counterclockwise
Fig. 5: 6.9L diesel engines Firing order: 1-2-7-3-4-5-6-8

1-5-3-6-2-4


ALL Jeep 4.0 motors use this firing order. Any year, any model, high output or not.


Also, the spark plug wire placement on the cap, in a clockwise direction from the post nearest the engine block is: 6-2-4-1-5-3. (to the left side of the number 6 post, there should be a hold down screw or strap for fastening the distributor cap to the distributor.

For a picture diagram, please go to this website:
http://www.jeepz.com/forum/engine/16923-six-cylinder-4-0-liter-jeep-engine-specs.html

3.9L V6 Engine. Engine Firing Order: 1-6-5-4-3-2. Distributor Rotation: Clockwise.............did i guess the right motor? let me know/rate me