96 nissan P/U 2WD, feels like missing cyclinder should I replace EGR value?

It is then if any of its wiring is missing plz check

check your mass air flow and see if the screan if blocked with carbon buil up

With a scanner connected to the car it may have codes to help you find the correct problem. like P0300 is readom cylinder missfire ( this means that many cyclinders miss and can be a vacume leak to low fuel pressure to EGR valve hanging open) P0301 -P0308 can be any number of these cyclinders misfiring as the cyclinders are numbered( The boots on the coils going over the spark plugs fail or get oil or water or even antifreeze in them and they miss. To pull the coils you need to pull the injector rail and if your not a regulr mechainc you sould hire this work done as the things you can break the a regular mechanic won't, May save you more than what the pro is going to charge.

well it is a missfire the timing may be the issue here

Had a similar problem that also caused the power brakes not to function. I believe there was a problem in the vacum fittings that was causing it to lose power but I am clearly not an expert.

i wouldnt clean it i would simply replace it. its about 100 dollars at autozone and while you have it off go ahead and clean the metal tube that goes into the housing that the egr valve attches to. its probably clogged up with carbon get a pocket knife and poke at it till it breakes then blow air into it to make sure its clear.

I had a 1995 nissan pick up with a similar problem, may want to try cleaning out or replacing the EGR valve.

check fuel pump pressure.it should be 41 to 47 psi.

reach to the underside of your egr valve and feel to see if the diaphragm moves as it warms up. if not you may need to replace it. be careful not to bur yourself though, the engine and egr can get very hot very quickly

Replace the camshaft sensor, the issue will go away.