Is the rubber boot cut or torn grease leaking around boot .if so then cv joint is bad and must be replaced
SOURCE: Clicking noise in front after hitting smaller bumps
it is the front strut i am a certified mechanic i have changed many of these
SOURCE: 2001 Chevrolet Cavalier front End Roar
You must replace wheel bearings in pairs to avoid loading the old bearing and, in time ruining your new bearing hub it is possible that you have already damaged the new hub
SOURCE: 1998 Chevy S10 front axle will not engage when put into 4 wheel
Normal thing that happens as long as onone (worked) on it, is the vacume hose going to the engage sevevo under the battery box has fell of on either end or is brocken on the way there. Then the once or now leaky battery acid ate up this same servo. then the cable going to the front axel breaks sticks falls off or even someone needing one climbed under your truck while parked somewhere to get one to replace their brokeen one now you don't have one then theaxel engage arm or gearset is damaged
SOURCE: 4 wheel drive will not engage front axle.actuator
On the front axle of your Suburban there is a thermally (an internal heater) activated devise that pushes on a lever to engage the axle. There is a technical service bulletin ( #76-43-01A) on this problem but the repair isn't cheap.It involves installing an updated devise with a DC motor from General Motors which also requires a new wire harness.
I have found that installing an aftermarket one (available at your local autoparts store) that just bolts on will work just as well.
It just threads in to a housing and is very easy to replace.
SOURCE: front axle does not engage when I shift into 4wd
http://www.fixya.com/cars/t2084504-4wd_wont_work_1999_chevy_tracker_but
If you tracker doesn't require you to be in park or neutral when engaging 4 wheel drive then please try the link above.
Testimonial: "seems to be right on"
91 views
Usually answered in minutes!
×