Hazards work, replaced my flasher relay, i can flip turn signal lever to turn signal on turn the corner and the lever flips back to it original position but the turn signal lights dont come up and there is no blinking or clickin noise. i flipped signal lever to turn signal on and in the steering column it sounds like its trying to kick on when the lever is initially moved, but i cant ever get turn signal lights to come on. all my other lights work. Any ideas. I haven't torn the dash apart yet. trying to avoid that if at all possible. it's not sounding like it is. :/ and last question...if it is indeed the turn signal switch would the lever still grab and release like its supposed to? or is it more of the switch is working but there's a short somewhere? and to my understanding there are no fuses for turn signals right? just relays?
There should be a fuse for the direction light. and a direction switch can be bad and still click and operate as it suppose to
SOURCE: 1993 Geo Prizm turn signals
You have a bad turn signal switch if the hazards work and the turn signals do not. It has nothing to do with the fuse or the flasher unit. Your switch is bad or you have a bad connection some where.
SOURCE: I have replaced the turn
would need a play with my automotive meter to be sure but i would go fir the hazard warning light switch
478 views
Usually answered in minutes!
thanks for the help. Trasmission started a pretty good leak over the weekend. Car is on its last leg and have decided to just replace it. Thanks for the comments!
×