Check engine light coming on codes are p1351 and p1343
Conditions for Setting P1351:
The voltage on the ignition control circuit exceeds 4.9 volts, and the engine speed is less than 250 RPM.
Bottom line?
Most likely its a bad Ignition Control Module.
1,119 views
Usually answered in minutes!
what should fix this problem
DTC P1351 www.hotrodlane.cc/.../LS%20trouble%20codes/DTC%20P1351.htmDTC P1351. Circuit Description. The ignition control module (ICM) has independent power and ground circuits. The circuits between the ICM and the powertrain ...
P1341: Multiple cylinder Misfire with Fuel Cut-Off Ok guys, here's the situation. I was having the white/bluish smoke issue at startup and the howling sound/vacuum that stoppd when dipstick was removed. I was also getting the intermittent SES light and rough idling.I had the OSV/rear manifold gasket cover changed and the smoking immediately stopped. I also cleaned the MAF and the SES remained with rough idle for about 300 miles. Then the rough idling stopped and SES stopped on its own. Now, 100 miles later the SES is back and the idling is rough, but not as rogh as at first. I went o AutoZone and got these codes and printout
×