BMW Cars & Trucks - Recent Questions, Troubleshooting & Support


The service and repair manual with diagram will help you step by step to fix the problem easily and you will get the manual from the given link https://toolsnyou.com

BMW Cars &... | Answered 6 hours ago


The player may be unable to "read" track 0 to identify the medium. In other words, the mechanism is defective.

BMW Cars &... | Answered Yesterday


I can't find it on a quick Google search, but put your VIN into this website and it'll tell you: https://decoder.bvzine.com/

BMW 320i Cars &... | Answered on Apr 17, 2019


Of coarse,All Season Tires, are not for snow

You need a couple of new wheels, and dedicate them to
2 snows, of your choice.

Look at tire rack.com, just for the tire tests,
then look locally for treads you like

There are better tires than continental

When you need 4 new tires look at Cooper

2007 BMW 525xi... | Answered on Apr 15, 2019


code p 0500 and 503 both refer to the vehicle speed sensor(VSS)---circuit malfunction or intermittent/ errattic high input====causes wiring-=--VSS---ECM--wiring poor connection--other connected system---instrument panel---VSS---communication control module
to have the abs light on I would be checking the communication control module or the ECM

BMW Cars &... | Answered on Apr 15, 2019


IT'S VERY EASY TO RESET THE TRANSMISION'S COMPUTER. HOLD GAS PEDAL DOWN. TURN THE KEY TO THE NUMBER TWO. CONTINUE TO HOLD THE GAS PEDAL DOWN FOR THIRTY SECONDS.RELEASE THE GAS PEDAL AND PRESS THE BRAKE PEDAL FOR TEN SECONDS. NOW YOU CAN TURN THE VEHICLE ON. THAT SHOULD TAKE IT OUT OF SAFE MODE

BMW X5 Series... | Answered on Apr 13, 2019


check the basics first. Fuel pressure - there is a shrader (sp?) valve on the fuel rail on the engine where you can check that. Check if there is spark - pull on of the coils and put in a spark plug and crank. It can also be the ignition switch but check the two things above and then you will know where to look for the problem

BMW 320i Cars &... | Answered on Apr 11, 2019


The timing is set by the engine computer. It uses the crank position sensor. There is nothing you need to do unless you want to change the mapping of the engine.

2007 BMW 320i... | Answered on Apr 11, 2019


Not sure what you are asking, need more info.

BMW Cars &... | Answered on Apr 10, 2019


More is good less AMP hours is bad.

BMW Cars &... | Answered on Apr 10, 2019


Look into this site.

https://www.manualslib.com/

BMW Cars &... | Answered on Apr 10, 2019


Check to make sure you did not damage the wires to the starter.

BMW Cars &... | Answered on Apr 10, 2019


Take it to a service center and have them put it o o lift and check it out.

BMW Mini Cars &... | Answered on Apr 10, 2019


Computer is sensing a drive ability problem which shuts down the transmission preventing damage. Called limp mode. You need to hook up a scanner and see what codes the engine has.

BMW Cars &... | Answered on Apr 10, 2019


Your receipt should have the contact information.

BMW Cars &... | Answered on Apr 10, 2019


Sounds like we need to open the valve cover and see what is happening.

BMW Cars &... | Answered on Apr 10, 2019

Not finding what you are looking for?
BMW Logo

27,229 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1996 BMW 318
1996 BMW 318

778 Questions

2001 BMW 325
2001 BMW 325

779 Questions

2003 BMW 325
2003 BMW 325

697 Questions

2000 BMW 3 Series
2000 BMW 3 Series

678 Questions

2001 BMW 5 Series
2001 BMW 5 Series

591 Questions

Top BMW Experts

stephen Kiarie
stephen Kiarie

Level 1 Expert

32 Answers

vince

Level 3 Expert

1234 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1165 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...