1992 Chevrolet C1500 Logo
Posted on Feb 13, 2012
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

1992 chevy c1500 5.7litre k series passenger side rockers no oil driver side rockers covered with oil engine dose knock

1 Answer

raj somaiya

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Chevrolet Master 5,370 Answers
  • Posted on Mar 03, 2012
raj somaiya
Chevrolet Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Nov 12, 2010
Answers
5370
Questions
0
Helped
3571103
Points
14579

For oil pump,oil pump pressure,oil warning light,oil low,oil ewplacing and other car engine oil problems,the help links are provided below.Click the link to go through the procedure :-----Oil light came on and the car died?http://schematicsdiagram.blogspot.in/2012/03/oil-light-came-on-and-car-died.html--------How to replace Oil filler cap or breather cap?http://repairhelpcenter.blogspot.in/2012/02/how-to-replace-oil-filler-cap-or.html---------Oil pouring out from left front of engine?http://schematicsdiagram.blogspot.com/2012/01/oil-pouring-out-from-left-front-of.html------Common Causes of Car Oil Leaks?http://schematicsdiagram.blogspot.com/2011/12/common-causes-of-car-oil-leaks.html--------Troubleshoot Car Oil leak?http://schematicsdiagram.blogspot.com/2011/12/troubleshoot-car-oil-leak.html--------Oil change details?http://repairhelpcenter.blogspot.com/2012/01/toyota-highlander-sport-oil-change.html---------Low oil pressure light?
http://howtobyme.blogspot.com/2011/11/low-oil-pressure-light-on-dodge-magnum.html
----------
leaking oil from oil pan?
http://howtobyme.blogspot.com/2011/11/kia-sportage-leaking-oil-from-oil-pan.html ----------
Car Turns OFF due to low oil pressure warning light?

http://schematicsdiagram.blogspot.com/2011/12/car-turns-off-due-to-low-oil-pressure.html

------------
leaking oil from timing cover?

http://technoanswers.blogspot.in/2012/02/toyota-corolla-leaking-oil-from-timing.html

----------
For more oil and oil pump details check out the direct links below: ---

How to Replace Oil Pan on car?
http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-oil-pan-on-audi-a4-and.html
--------
How to Replace an Oil Pan Gasket?
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-oil-pan-gasket.html
-----------
HOW TO REPLACE AN OIL PUMP
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-oil-pump.html
----------
HOW TO CHANGE ENGINE OIL AND FILTER
http://schematicsdiagram.blogspot.com/2011/07/how-to-change-engine-oil-and-filter.html
----------
HOW TO REPLACE AN OIL PRESSURE SWITCH (SENSOR)
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-oil-pressure-switch.html
-----------
How to Check Differential Oil Leaks and Replace Oil
http://schematicsdiagram.blogspot.com/2011/07/how-to-check-differential-oil-leaks-and.html
----------
HOW TO PERFORM A BASIC ENGINE TUNE UP-OIL CHANGE
http://schematicsdiagram.blogspot.com/2011/08/how-to-perform-basic-engine-tune-up-oil.html

-------


Oil pan Gasket on car?
http://howtobyme.blogspot.com/2011/11/oil-pan-gasket-on-1998-toyota-tercel.html

---------

Oil pressure for car?

http://schematicsdiagram.blogspot.com/2011/12/oil-pressure-for-2001-gmc-jimmy-v6.html

----------
How to replace Oil Pan on car?

http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-oil-pan-on-2008-honda.html

---------
How to replace Oil Pressure Sensor on car?

http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-oil-pressure-sensor-on.html

-----------
How to replace Oil Pump on car?

http://howtobyme.blogspot.com/2011/12/how-to-replace-oil-pump-on-2008-honda.html

----------
Car oil leak?

http://schematicsdiagram.blogspot.com/2011/12/car-oil-leak.html

----------
Car oil leaks from valve cover gasket?

http://schematicsdiagram.blogspot.com/2011/12/car-oil-leaks-from-valve-cover-gasket.html

----------
Oil light blinks on dashboard?

http://schematicsdiagram.blogspot.com/2011/12/oil-light-blinks-on-dashboard.html

-----------
Oil pressure issues on car?


http://repairhelpcenter.blogspot.com/2012/01/oil-pressure-issuers-on-toyota-tundra.html

-----------
Oil leaks from air filter on ford?

http://technoanswers.blogspot.com/2012/01/oil-leaks-from-air-filter-on-ford.html

---------
Wire running from oil pan to alternator?

http://technoanswers.blogspot.in/2012/02/wire-running-from-oil-pan-to-alternator.html

--------------
Why car leaks oil from oil filter?

http://schematicsdiagram.blogspot.in/2012/02/toyota-camry-leaks-oil-from-oil-filter.html

------------
Why engine is consuming lots of oil?

http://schematicsdiagram.blogspot.in/2012/02/2008-scion-xb-24l-engine-is-consuming.html

-----------
Maint REQD message on car dash?

http://schematicsdiagram.blogspot.in/2012/02/maint-reqd-message-on-2008-lexus-rx350.html

------
Remove Sump oil pan?

http://repairhelpcenter.blogspot.in/2012/03/remove-volkswagen-sump-oil-pan.html

--------
Sump not coming OFF?

http://repairhelpcenter.blogspot.in/2012/03/sump-not-coming-off.html

-----------
How to remove the sump on car?http://repairhelpcenter.blogspot.in/2012/03/how-to-remove-sump-on-vw-beetle.html----------Car oil sump removal diagram?

http://repairhelpcenter.blogspot.in/2012/03/volkswagen-beetle-oil-sump-removal.html

---------

This will help.

Thanks.

5 Related Answers

Anonymous

  • 12 Answers
  • Posted on Nov 27, 2008

SOURCE: knock sensor for 1997 chevy C1500 Pickup Truck

Located on right hand side of block (pass side). It is between motor mount and starter.

Ad
countrysi248

Jerry Koski

  • 443 Answers
  • Posted on Apr 24, 2009

SOURCE: knocking or ticking in the

you are right its either a rocker arm broken or loose or it also could be a broken valve spring so look for all three While you have the valve cover off to save you coming back and looking again ... thanks Jerry

Anonymous

  • 366 Answers
  • Posted on May 28, 2009

SOURCE: Knock sensor location

if its a cmfi or csefi injection system theres 2 knock sensors 1 on each side of engine block,1 under the left bank of block,the other under right bank of block,tbi inj. theres 1 in front of starter.

Anonymous

  • 5158 Answers
  • Posted on Sep 02, 2009

SOURCE: falling loose pushrod inside 350 chevy engine 1992

you don't really have much choice but to disassemble the motor, or at the least remove the oil pan, the push rod should be in there. if you see any part of the pushrod from the top try using a magnet to retrieve it.

Anonymous

  • 6982 Answers
  • Posted on Feb 02, 2010

SOURCE: I have a 91 chevy, 2wd with a 350. My oil pressure

Sounds like you have good pressure but would not hurt to put a mechanical gauge on it to verify that. Chances are that the sending unit is going bad or a passageway to it is obstructed. If pressure is good, change the sender and put some marvel oil in there to clean up the residue.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

2007 ford explorer sport trac 4.0 v6 all 3 spark plugs on passenger side are coated in oil doesn't smoke 2nd set of plugs in 3 months driver side plugs are fine im tired of guessing anyone know?

comment exactly what you mean when you say --covered in oil
1-- is they covered in oil on the outside around the insulator and wires/ coils
2-- are the center electrodes black with oil and misfiring
if it the outside then replace the rocker cover gasket or if the plugs are recessed into the rocker cover , replace the oil seal under the plug tube in the rocker cover
2helpful
3answers

Lose vales on a98 votec 350 chev.

Determining what caused sudden slack in valves would be of concern to me, as in perhaps, changed oil brand, grade or filter incorrect?
Most small block chevy's have adjustable rocker arms. Is that not the case with yours?
2helpful
2answers

Were is the drain plug located on a 2007 chevy 5.3 on the passenger side of engine . is it behind the ac unit. i want to put a engine block heater in.

The block drain is on the passenger side of the engine, in the center of the block near where the oil pan attatches to the block.

Engine Block Plugs/Sensors


Engine Block Plugs/Sensors
100 - Engine Block
100 - Engine Block
101 - Oil Gallery Plug - Front
110 - O-Ring
111 - Oil Gallery Plug - Rear
112 - Oil Gallery Plug - Side
113 - Washer
114 - Engine Coolant Heater
115 - Washer
116 - Oil Gallery Plug - Side
117 - Washer
130 - Transmission Housing Locating Pin
145 - Washer
146 - Engine Block Coolant Drain Hole Plug
701 - Crankshaft Position (CKP) Sensor
702 - O-Ring
718 - Knock Sensor
718 - Knock Sensor
739 - Bolt
739 - Bolt
750 - CKP Sensor Bolt
0helpful
1answer

How doe i put a head gaskit in my 1992 chevy silveroto 350 v8 thae simpilist way please and mabey some diagrams

Lots of work. Best bet get a Chilton manusl covering that year from the library or Ebay. Real quick disconnect battery, drain coolant, remove intake manifold, remove any accessories on the side of the engine you're working on , like compressor. Remove valve cover, loosen all valve rockers, remove all 8 push rods, remove head bolts, pull head. Lots of smaller stuff I skipped. You will definately need the specs to reset valve/rocker, torque values. Gasket set, change oil because there will be water in it. Better have a friend who has tried this before too. Can be done but it's tough to do the first time.
0helpful
1answer

Oil pressure is fine. Oiling only to the pass side valve train.

The 3.1/3.4 engines are built the same way. The oil goes through the cam bearings then to the lifters, then the push rods to the rocker arms. The last engine I seen that had a weird problem had the cam bearings spun. Unfortunately there is no easy way to check for this problem short of disassembling the engine.

The other possibility would be bad lifters but loosing half of the engine lifters wouldn't be possible. Sometimes the pushrods wear on the contact areas also but not usually half an engine.

This isn't going to be easy, Good luck.
0helpful
1answer

1992 Camry v6 XLE: Started engine this morning,

Is it coming from the driver side, passenger side, front or rear of the engine? It could be a cam or crank seal if it is coming from the passenger side behind the plastic timing cover.
1helpful
1answer

Falling loose pushrod inside 350 chevy engine 1992

you don't really have much choice but to disassemble the motor, or at the least remove the oil pan, the push rod should be in there. if you see any part of the pushrod from the top try using a magnet to retrieve it.
1helpful
1answer

The engine knocks at higher rpm, only at high rpms

First no matter what check the oil level and then if it's a high rev tapping you need to allow the oil to flow through the engine block to try to coat and settle your valves.

But if it's really " knocking " sounds like your lifters and rocker arms are allowing your piston rods to clatter and that needs to be looked into fast.
0helpful
1answer

CAR KNOCKING / 1984 CHEVY CAPRICE

It could be a rocker arm as well as a lifter or even a rod, you need to determen ware its comming from top end or bottom end. With engine running take a long screwdriver hold the handle end to your ear and other end to rocker cover the whole length of cover, both sides if there is a loose rocker you will hear it, same on oil pan if you suspect its a rod. You would be surprised on how much you can hear thru that.
5helpful
2answers

Pathfinder 2003 pcv

The PCV valve is located in the valve cover on the passenger side of the vehicle. The valve is closer to the firewall than it is to the front of the engine. It has a hose attached to it and threads into the valve cover.

Nissan Scope Technician- 10+ years experience is Nissan dealership
Not finding what you are looking for?

392 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...