Anonymous posted an answer for this Sony FD Trinitron WEGA KV-21CL10 21" TV:
"sounds like the crt is shorted causing the hot to short"
Anonymous posted an answer for this Mitsubishi WS-65511 65" Rear Projection Television:
"more than likely. and you will have to solder it in"
Anonymous posted an answer for this Televison & Video:
"call a qualified repair person"
Anonymous posted an answer for this JVC HD-52G886 52" Rear Projection HDTV:
"Are you using HDMI. If you are see if HDMI audio is activated in the cable box using..."
Anonymous posted an answer for this Sony KDS-60A2020 60" HDTV:
"make sure the lamp and lamp door are seated properly. does it blink any codes. 3 blinks is..."
Anonymous posted an answer for this Mitsubishi WD-52525 52" Rear Projection HDTV:
"convergence amp is defective"
Anonymous posted an answer for this RCA D52W20 52" Rear Projection HDTV-Ready Television:
"make sure you are in cable mode for auto program"
Anonymous posted an answer for this Funai F42PDME 42 in. Plasma Television:
"try format button"
Anonymous posted an answer for this Televison & Video:
"turn the cable box volume up"
Anonymous posted an answer for this Mitsubishi WD-52525 52" Rear Projection HDTV:
"check the lamp"
Anonymous posted an answer for this HP LC3760N 37 in. LCD HDTV:
"more than tv replacement"
Anonymous posted an answer for this Televison & Video:
"It sound like the upper y drive board off the y sustain pcb. This board is located on the..."
Anonymous posted an answer for this Philips 27PT543S 27" TV:
"try deguassing crt with deguassing coil. If this doesn't work the shadow mask has come..."
Anonymous posted an answer for this RCA HD52W58 52" TV:
"look for capacitors in the front of the deflection board to be bulging at the top and..."
Anonymous posted an answer for this RCA D52W20 52" Rear Projection HDTV-Ready Television:
"There most likely an open fuse going to the convergence amps. There are 3 fuses which are..."
Anonymous posted an answer for this Mitsubishi WS-65907 65" Rear Projection Television:
"It could possibly be the convergence amps being shorted. This model uses STK392-570 amps...."