Sharp Office Equipment & Supplies - Page 8 - Recent Questions, Troubleshooting & Support
How to enter the Service mode on Sharp MX2610n
I have a MX4060V and cleared error h4-00 after reduced power outage by pressing home button twice, then pressing on the version number on the bottom right of the box. then you get access to the panel to press #*c* and use number 14 press execute at the bottom of the screen and yes then press the back arrow, when it restarts the error should be gone.
How can I fix faint copy in sharp mx-m564n copier?
This could be fixed by cleaning the glass lens on top of the copier, which would make sure that your paper comes in contact with only one spot of light as you press your keys. This way, there will be no distortion from multiple spots hitting the same place on your paper. The printer also needs to be set up correctly before you can use it again, so check out this guide for more information.
Reset Admin Password Sharp Printer MX 3550V
Page 56 of the following refers to entering the Systems Settings. From there, one enters the Security Settings. That is where changes to the password may be performed. My guess is that the default password is admin.
https://business.sharpusa.com/portals/0/downloads/Manuals/MX_3050_3550_4050N_Quick_Start_Guide.pdf
Chances are you must be logged in as administrator, see page 58.
That said, perhaps to following will be of value: When changing the password, be sure to remember the new password.
(It is recommended that you periodically change the administrator password.)
Enter a password consisting of 5 to 32 characters, and tap the [Store] key.
Your setting is made valid only when the machine is turned On again.
• The user-level authentication password is required to add, edit or delete the destination. When you log on, enter
"users" as the user name. Then, enter the user password that you have registered with this option.
The administrator-level authentication password is required to select all settings and the same functions as those
available with the user-level password. When you log on, enter "admin" as the user name. Then, enter the
administrator password that you have registered with this option.
• If you tap the [Store] key without entering a password, the previously set value is assumed. Password protection is
enabled by default
http://www.sharpusa.com/support.aspx
F2 40 error in Sharp AR=5520 copier
F2 code means a problem with toner cartridge error. Sometimes F2 is caused by loss or broken harness in the scanning section, in this case, it sometimes displays an E7 code. When f2 flashes on display just press the Start key you will receive a subcode. If the subcode is F2-02 this is a toner supply problem. If the F2-04 toner chip is damaged, replace the chip. If the F2-40 developer is damaged, change the developer
- Clean toner cartridge CRUM chip contacts and check if cartridge destination is proper for your area.
- This code you may have to clean out the developing unit and start with a fresh developer. Make sure the developer unit is not leaking from one of the bearings. You may need a tech for this one.
- Replace the toner cartridge.
- Change the developer.
If you find your parts, then replace the parts and error still remains, after automatically reset the error code. If the error is still showing even after the above solutions, then you have no choice other than calling
Sharp service technician.
My Sharp MX-M453N photocopier machine display error E7-21.
So far, I've seen 2 faulty Pastel2 LSU's within the first week of installation. All run-up and first week operation & testing is OK, then the LSU goes down.
Run the LSU test in sim 61. If you get result NG, you have a dead LSU. If the error disappears, keep an eye on it for now, but you may need a new LSU soon. Just warning you.
Not finding what you are looking for?