Sharp Office Equipment & Supplies - Recent Questions, Troubleshooting & Support

sharp ar 5516 showing ( - - - ) what's the solution

Sharp AR-5316... | Answered 2 days ago

L8-01 error should reset itself automatically after repair. This code means something wrong with power supply or power distribution. It is job for experienced engineer, all you can do is reconnect connectors of power supply harness.

Sharp MX-M350... | Answered on Dec 05, 2019

It means that your fuser unit has reached its lifespan: you can still use the machine but be aware you will need a fuser rebuild in the near future

Sharp MX-2300N... | Answered on Dec 04, 2019

Problem with your fuser unit. Bad heater element or bad rollers or thermistor

Sharp Office... | Answered on Dec 04, 2019

It is the toner light if it is a triangle of red dots

Sharp Office... | Answered on Dec 04, 2019

Is it the toner light which is a triangle of dots or the waste toner light which has a line under it ?

Sharp Office... | Answered on Dec 04, 2019

Here is a link:

Sharp Office... | Answered on Dec 04, 2019

did you clear the require counter and run the required test before (counters) and test after ward????

Btw, I’m available to help over the phone in case u need at

Sharp Office... | Answered on Dec 02, 2019

1- replace the toner cartridge.
2- replace the chip toner cartridge.
3- check and fix connection between toner cartridge and mcu pwb.

Sharp AR-5316... | Answered on Nov 29, 2019

Clean our the developing unit

Sharp Office... | Answered on Nov 28, 2019

It's not developer light.
It is drum unit light and maintenance.
You have to replace the Drum, Blade and Developer.
After changing them you have to reset the maintenance, drum,developer counter.
This procedure must be made by a copier tech.

But if you still want only the developer the code is AR-202D

Sharp AR-M160... | Answered on Nov 28, 2019

F5-02 means the copy lamp is not on or not bright enough.
Remove the glass and clean all the optics in the scanner including the lamp, if it is coming on that is. Make sure you clean the bottom of the glass, the white strip on bottom well.
You can also press # * C * and the machine will go into diagnostics,
then enter 14, then 1 and execute. then 15 , 16 , 17 and execute those fault clearing procedures.
If the lamp is bad let me know I can get the part number for you.

Sharp AR-M257... | Answered on Nov 28, 2019

Link above also has a service manual for that model.

Quoting from link above:

  • Code: F5-02
  • Description:Copy lamp lighting abnormality
    The copy lamp does not turn on.
  • Causes:Copy lamp abnormality Copy lamp harness abnormality CCD PWB harness abnormality.
  • Remedy:Use SIM 5-3 to check the copy lamp operations. When the copy lamp lights up. Check the harness and the connector between the CCD unit and the MCU PWB. When the copy lamp does not light up. Check the harness and the connector between the copy lamp unit and the MCU PWB. Replace the copy lamp unit. Replace the MCU PWB."

Sharp Office... | Answered on Nov 25, 2019

Not finding what you are looking for?
Sharp Logo

Family Lines

14,477 questions posted

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers


Level 3 Expert

8081 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides