Polaroid Office Equipment & Supplies - Page 5 - Popular Questions, Answers, Tips & Manuals
Cant figure out the bluetooth code
Look on the back of your device for the Bluetooth passcode for the device. Typically the pairing code for headsets is printed on a sticker that is then placed on the underside of the accessory.
Go into the Settings menu for your
computer to find its Bluetooth passcode. Some laptops will randomly generate a new Bluetooth passcode for you each time you want to pair them with a new device. In that case the menu setting you're looking for is something like "Generate new pairing code."
Look in the instruction book for your Bluetooth accessory if you cannot find the passcode attached to the device or in its menu. Many manufacturers will print the passcode for devices in their instruction book. If you still can't find the passcode, try using all zeros
.
Hello, I've been trying to
First perform systems connectivity inspection on the printer to the computer. Ascertain that the power cables are in source of current. Second, ascertain that the cable connection from the printer to the computer is intact. Third if any cables were loose, reconnection attempts would require restarting the computer altogether to acquire the new settings before printer actions can take place. Second perform a test print job. Usually the type of material requirign printing should have been highlighted or selected with the mouse as an indication of what requires hard copying. Clicking on the printer job buttons should achieve responses fo action. Important notes.
1. A change of printer accessories like ink or paper may have caused printer malfunction. Inspect the compartments that holds ink/ paper for inappropiately closed entrapments, dislodged supplies or depleted.
2. An attempt to expose the ink compartment while printer is still powered to the computer would require powerign of for restarting once more to acquire the new settings.
3.Refer to the printer user guide for details
What is the default passkey?
Isn't it usually four zeroes however Enter any 4 digit number on bluetooth. Polaroid pogo will then ask you for a passcode. Enter the same 4 digit number.
I have a t mobile
Hello there!
1. Go into your phone settings and under "Bluetooth" find an option that says "Find Me" and turn on the option for as many minutes as you can.
2. On the other device go into the settings and under "Bluetooth" find an option that says "Search/Scan" or something similar.
3. The second device will scan for your phone and when it finds it, connect to it.
4. It'll ask you for a passcode, it is 0000 by default
5. Enter 0000 on both devices and now they should connect to each other.
If my solution didn't work, before rating my answer, please comment back and I will suggest more ways to troubleshoot and solve your problem. Thanks and good luck!
Where i can find the polaroid zink photo paper
Hi,
You can find these paper in any nearest Departmental stores like bestbuy, Costco, Walmart or from any Stationary Store which supplies papers for printing
Regards,
Shawn
* Please rate this solution with Thumbs up and Testimony to help us improve providing support
Wont pair with bluetooth
Shut both back down and power up once again, attempt to pair once BOTH items are placed in descovery mode.
When turning on my Polaroid
Hello Gaspare, hi, looks to me you have power supply problems, the initialization process failed due to a short or a bad part on the main board, this bad part was detected on initialization. The bad part could be a shorted transistor or a bad lamp or relay or the failure of the entire main board. Now the question is do we have parts available for repairs. I suggest you visit your Polaroid store for proper service.
12/4/2010 7:51:46 PM •
Polaroid...
•
275 views • 0 helpful votes
Trying to print coupons that
There is a post about using the free Pogo app in the Android store that solves some problems.
http://www.fixya.com/support/t7303474-successfully_paired_pogo_samsung
The image should be in a .jpg format.
12/18/2010 1:12:04 PM •
Polaroid...
•
166 views • 0 helpful votes
I connected my Sony Ericsson
I'm sorry to tell you but there is nothing you can do about that, it's a hardware problem: the BT chips from all Sony products are made with a tweaked specification that the one from the rest of the world so they almost never work outside of their own brand.
You will have to send the photos in another way.
I get white stripes on
Hi,
This is due to shock or may be you have dropped your camera, What you can try to do:-
1. Turn off the camera.
2. Open the paper tray door and remove the
photo paper.
3. Place one sheet of photo paper upside down
(with watermark facing up) in the paper tray.
4. Close the paper tray door.
5. Press the PRINT button to enter the print
menu.
6. Press the OK or PRINT button to process the
transaction.
7. Once the ZINK photo paper has ejected, open
the paper door and reload the paper.
8. Resume printing. If streaks are still present,
then repeat this process.
I hope this will solve your problem.
Thanks for using Fixya
Good Luck and have a nice day.
Not finding what you are looking for?