Polaroid POGO - Answered Questions & Fixed Issues - Page 9

You may have inadvertently switched your projector to a different input mode, or the mhz refresh rate, etc., Jon.

If you are handy with allen wrenches, quality screw drivers, and the like, you might 'try' opening up the can of worms and gently manipulating the red LCD panel (it will be obvious--a magenta color when off), by slightly loosening the holding screws, then moving--ever so slightly, the panel untill the ghost disappears. Do not do this though, untill you mark the present position on the top and bottom of the LCD panel. Take pictures, far and close-ups, as you go so you can reassemble the unit. The typically three LCDs can be located by finding the prism cube, located under the circuit board, and just before the output lens. Be patient, and have fun. I did this with an 'out of wack' throw away, and now it is just as enjoyable as my 'dimmer' HDTV projector. Even side by side, from 8 feet away, when both are making 72" images, the HDTV is barely clearer, Jon.

The scanner uses a "twain" driver, try searching for that, it may be one of the files you already downloaded. Just look in the download u got.Also try going to add hardware, select the scanner there and poit it to the downloaded file when uit asks if you have a disk that came with it. Download the drivers to your desktop, rt click and open a folder on the desktop, and drag all of the drivers and the Twain one especially, into the folder.

Normal 0 Could have a corrupt driver.
Disconnect the printer or at least be sure it is turned off. I'd do both and when the CD software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

paul here i am, what happened, you suddenly ended our session, do you still have the script? we can continue it there if you want. just watch out for my reply.

Download your manual HERE

Your antivirus or system profile is quietly getting in the way, likely.  Check logs if you like, then do the footwork to let installer programs run.  Contrawise you can copy the driver to a directory someplace and install from there, perhaps using RunAs (in WinXP.)
  Perhaps you should say which OS you intend to install it on?
That cheap substitute for a webcam?


http://www.buymebuyme.com/retail/catalog/product_44126_Polaroid_iZone_Webster_Mini_Photographic_Scanner.html

It's more trouble (because of the AA batteries) than it's worth!  Get something useful!

hi
check your printer that not any paper jam in printer remove it.
also change printer roller.

Go to:

System Preferences (you can get there by clicking on the Apple Menu in the top left corner) -> Displays -> Detect displays

After you click "Detect Displays" your G3 should automatically send the display image to your projector.

afaik, polaroid did not provide drivers beyond windows 98. I think you may need to upgrade your printer too. I expect the modern printers are far better, in any case.

Did you try going into MENU --> PICTURE --> SIGNAL MODE, and then pressing > to go through all the signal modes? On mine, most of the signal modes split the screen weirdly as you described, but one of them (in my case XGA3, but I'm not using a Mac) looks right.

200 ml is about 6.76 US ounces or about 7.04 UK ounces.

'Make model (what it is)' is needed in questions like this, and in fact ALL questions!! But we can just guess.

Error Code Ir 3300 e350-3000 and e350-00002

Copytechnet https://www.copytechnet.com > ... > Canon May 1, 2018 - Put ALL the original boards back in the machine. Go to service mode level 2 & perform E355 clear. If this fails your machine is scrap. CANON iR2200 Error code E000350-001 Jan 22, 2007 error code :E0003-0002 canon IR 2880i Feb 5, 2018 Canon IRA C5540I Code E000354-0002 Sep 23, 2021 E000350-3000 on IRC4580 Sep 25, 2017 More results from www.copytechnet.com

Canon iR Advance 4245 - E350-0002

PrintCopy .info https://printcopy.info > code=E350-0002 Canon iR Advance 4245 ; Code: E350-0002 ; Description: System error ; Remedy: Contact to the sales companies. ..

This link is the best I can come up with: How to fix E6 & E7 on Trojan treadmill solved!! (youtube.com)

Call your supply company.

The series on the following link includes the model you are asking about. EMERSON FINCOR 2330MKII SERIES EQUIPMENT MANUAL Pdf Download ' ManualsLib

How to set up tax rate on Ativan 12 digit calculator

You posted to the Category 'Cars and Trucks'? shedding? Help in the link https://www.google.com/search?q=Tech+solutions+mod%23+TS8000 All questions need 'make model (what is is)' as first 3 words. Thinking that this might be a 'shredder' gives better results, we also have a Shredder Category, so I moved it. Shredders have an overheat thermal cut out and also a thermal fuse. It may reset itself. https://www.google.com/search?q=Tech+Solutions+TS8000+shredding+no+power ..

Edited for clarity. Full 'make model (what is is )' please first 3 words. Thermal cut out, thermal fuse, or burned out motor. They all have a suggested time limit for running them and is generally 20 minutes unless it is a commercial model and cost $1,200 to $4,000. https://www.google.com/search?q=Tech+Solutions+TS8000+shredding+no+power It looks to be a capable machine, but no parts from 'Shredder Parts dot com'. https://www.google.com/search?q=Tech+Solutions+TS8000 ..

Try "supervisor" as the username (no password).