Polaroid POGO - Answered Questions & Fixed Issues - Page 8

There is a menu accesible also from the buttons and you can change it there.

Hi. I think there are two people around the world that have a Lumia 800 AND a Pogo (including myself). The windows Phone 7.5 doesn't support the BlueTooth Object Push Profile (OPP) Standard. But the Windows Phone 7.8 does (I have installed and it works)

try to reset with factory mode.

click start right click on computer select properties device manager scroll to

universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers

if you can see your usb drive but its not working

ports (com&lpt) right click update driver if this fails to fix the problem

check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems to a computer and its parts hope this helps

check drum inside cartridge

Phone 1-800-312-2615

Well the default PIN code for pairing your polaroid PoGo printer via Bluetooth is 6000.
Hope that helps. please let me know if you need further assistance
thanks for using fixya

If you didn't change anything, the standard code that comes with de pogo is 6000

The Pogo passcode cannot be changed. It is fixed at 6000.

you can get the manual from http://personalcare.manualsonline.com/manuals/mfg/genie/gl-10.html

thanks

Yes! but first you must scan them into the computer and open them in a photo editor application like Photoshop. There you can do a whole world of editing including lightening your fotos.

Good luck and god bless!

First perform systems connectivity inspection on the printer to the computer. Ascertain that the power cables are in source of current. Second, ascertain that the cable connection from the printer to the computer is intact. Third if any cables were loose, reconnection attempts would require restarting the computer altogether to acquire the new settings before printer actions can take place. Second perform a test print job. Usually the type of material requirign printing should have been highlighted or selected with the mouse as an indication of what requires hard copying. Clicking on the printer job buttons should achieve responses fo action. Important notes.
1. A change of printer accessories like ink or paper may have caused printer malfunction. Inspect the compartments that holds ink/ paper for inappropiately closed entrapments, dislodged supplies or depleted.
2. An attempt to expose the ink compartment while printer is still powered to the computer would require powerign of for restarting once more to acquire the new settings.
3.Refer to the printer user guide for details

check all the fans and filters, make sure all the fans are turning properly and make sure none of the filters are plugged there is usually only 1 but there may be more.

Hello Gaspare, hi, looks to me you have power supply problems, the initialization process failed due to a short or a bad part on the main board, this bad part was detected on initialization. The bad part could be a shorted transistor or a bad lamp or relay or the failure of the entire main board. Now the question is do we have parts available for repairs. I suggest you visit your Polaroid store for proper service.

Have you looked at the manuals available online?

http://store.polaroid.com/media/document/InstantDigitalCameramanual20090115ENGLISH.pdf

Hi! I having solve for this Problem! But you must have WinXP driver for that and you must have an driver-Installation from WinXP!
Install E+48U driver under "unsecured modus" and evan whit:
you must copy the Folder from XP c:\windows\Twain_32\ePlus48U ....... copy to Win7 same phat .
plus: file wiatwain.ds same phat .
than: copy XP-> ausba4.dll to W7 c:\windows phat .
and: copy XP-> c:\scanpanel Folder to W7 same phat .
run IrvanView choice TwainSource -> e+48U
and enjoy
All under "unsecured modus"!
When you need help contact me!

yes please try at www.p-ips.eu

Panasonic support is just about non-existent anymore.

Try here

http://polaroid.com/support.php

kindly chage the data cable of scanner and port also.

[email protected]