Mitsubishi Televison & Video - Page 5 - Answered Questions & Fixed Issues
Green timer light won't stop flashing on mitsubishi ws 73711.
the green light blinking is normal if set has been unplugged--when set is plugged back it should blink for about 70 seconds and then go out--then you can try to turn it on---it is the DM unit inside the set booting up.If the light just blinks and never stops you have likely bad caps in the DM unit---there are kits available for that.The other possible reason is that so called reset switch may be bad--fairly easy way to find that out and it is more common than you would think, let me know if you have questions.SD TECH
12/1/2020 2:58:34 PM •
Mitsubishi...
•
Answered
on Dec 01, 2020
•
560 views
Buzzing after 1 hour
Is the buzzing coming from the back of the TV, staying loud even when the volume is turned all the way down, or is it coming from the speakers?
11/22/2020 4:17:56 PM •
Mitsubishi...
•
Answered
on Nov 22, 2020
•
620 views
Tv turns on then off after a few seconds.
Try this and let me know what you find:
Normal
0
false
false
false
MicrosoftInternetExplorer4
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
MOST OF THESE SETS HAVE A SELF DIAGNOSTIC:
UNPLUG TV AND THEN PLUG BACK IN---TURN ON---GREEN POWER
LIGHT COMES ON FOR A MOMENT AND GOES OFF.
PRESS AND HOLD “device” and “menu” buttons on front of tv
for at least 5 seconds and then release both together.
Watch for power light to blink in a sequence:
1 blink-then 2 blinks-------no error
2 blink-then 1 blink-------X-ray protection
2 blink-then 2 blink-------SHORT PROTECTION*******
2 blink-then 3 blink---------deflection circuit problem
2 blink-then 4 blink---------vertical circuit problem
******2, then 2 is most common---usually means one of the
fuses that protect the Convergence IC or IC’s is blown---set will detect no
voltage to convergence IC and shut down.
SET WILL REPEAT BLINK ERROR CODE UP TO 5 TIMES AND THEN TO
GET IT TO REPEAT MORE YOU HAVE TO UNPLUG SET AND TRY TO TURN ON AGAIN.
IF IT IS 2 AND THEN 2---USUALLY
CONVERGENCE CIRCUIT PROBLEM
let me know what you find--hope that you find 2 blinks, a pause and two blinks--this is the most common and easiest to fix.
if this has helped you rate this solution as I do this here for free.
SD TECH
10/4/2020 5:26:18 AM •
Mitsubishi...
•
Answered
on Oct 04, 2020
•
7,889 views
Do a Mitsubishi 73 inch tv have a reset button on it
System Reset
Step 1
Open the front panel by pushing on it. Pressing on the panel releases the lock and allows the front panel to pop open slightly. Pull the corner gently to open the panel completely.
Step 2Use a pointed object, such as the sharpened end of a pencil or the tip of a paper clip, to push the "System Reset" button.Step 3Wait about one minute, or until the green LED light on the front panel display stops flashing.Step 4Turn your television back on once the green LED light turns off.
9/4/2020 6:04:45 PM •
Mitsubishi...
•
Answered
on Sep 04, 2020
•
87 views
Mitsubishi wd-65731.. timer light blinks then the lamp light blinks
Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
Blinking codes details of many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty.
View the site by desktop or webview on mobile devices to see the "search box". Type in the brand name of your set in search box; to get gathered the related posts.
8/20/2020 2:25:05 PM •
Mitsubishi...
•
Answered
on Aug 20, 2020
•
452 views
I have a mitsubishi 73inch and it's blinking green & shut off by itself
Several problems may cause your Mitsubishi television to shut off by itself. ... Plug the television in, replace the fuse or reset the circuit breaker as needed. If the light is blinking green, a power surge or unusual digital signal was detected by the television. To prevent damage, the television shut itself off.
5/12/2020 4:15:21 PM •
Mitsubishi...
•
Answered
on May 12, 2020
•
86 views
Not finding what you are looking for?