Mitsubishi Televison & Video - Answered Questions & Fixed Issues


If the status LED shows a consistent green light it means that the power is on, on the TV. ... If the status LED is blinking yellow, that means the lamp cover is open. If the status LED is blinking red and then blinks yellow, that means you will need to follow that code to find the problem with the TV.Aug 14, 2013
www.youtube.com > watch

Mitsubishi DLP TV Repair - TV is Blinking - How to Identify ...


Mitsubishi... | Answered Yesterday | 12 views


It's an antique and needs replacing.

Mitsubishi... | Answered Yesterday | 15 views


YOU HAVE TO SCAN FOR CHANNELS THRU THE SETUP MENU

Mitsubishi... | Answered on Jan 19, 2020 | 16 views


The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size

Mitsubishi... | Answered on Jan 13, 2020 | 81 views


TRY MITSUBISHI WEBSITE , FIXYA DOES NOT HAVE SUCH A THING OR GOOGLE

Mitsubishi... | Answered on Jan 10, 2020 | 19 views


The main problem is that you have an antique dinosaur that is well past its sell by date.

Here is an answer, but the age is the problem. An 86" Ultra HD 4K flat screen set would greatly improve your viewing enjoyment, though not the effect on your pocket!

https://techlore.com/forum/thread/21148/mitsubishi-ws-65313-will-not-come

Mitsubishi... | Answered on Jan 06, 2020 | 22 views


Can you try this and post the result(s) here?
- When the TV is OFF, Press & Hold the "Power" button for a bit more than 30 seconds. Please post the result here...Thnx

Mitsubishi... | Answered on Dec 31, 2019 | 142 views


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty.
Counting of number of blinks to Philips TVs is entirely different to that of other brand TVs. It is not a direct count procedure. The site have details about how to count the number of LED blinks [Fault Codes] to Philips brand TVs are given; along with details of the faulty circuit location.

Mitsubishi... | Answered on Dec 15, 2019 | 41 views


CHANGE THE SLEEP TIMER TO 0

Mitsubishi... | Answered on Dec 10, 2019 | 31 views


Failing power supply

Mitsubishi... | Answered on Dec 03, 2019 | 31 views


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Mitsubishi... | Answered on Nov 14, 2019 | 30 views


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Mitsubishi... | Answered on Nov 14, 2019 | 30 views


The was a previous answer on Fixya ( John Betancourt Apr 25, 2019 What I did I open it up and removed the panel and clean out the fan.it was very dusty.)

I'm not sure that it will fix you problem but if it does let me know. There's a video on youtube which will a bit more helpful. It's called "Mitsubishi DLP TV Repair - TV is Blinking - How to Identify Blink Codes & Fix DLP TVs".

https://www.youtube.com/watch?v=INird71KKtA

Mitsubishi... | Answered on Oct 20, 2019 | 28 views


remove the lamp and check to see if its ok, if ok replace lamp thermal sensor

Mitsubishi... | Answered on Oct 10, 2019 | 308 views

Not finding what you are looking for?
Mitsubishi Logo

Family Lines

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76204 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...