Boating - Page 6 - Recent Questions, Troubleshooting & Support

A boat designed for greater touring distances and a higher degree of safety would have a smaller cockpit, hatches and bulkheads. The smaller cockpit allows for contact with your knees for control. The hatches and bulkheads are designed to be, for the most part, air- and watertight. You can store gear (in dry bags) in these as well as have hundreds of pounds of positive buoyancy should your cockpit fill with water.

Wilderness... | Answered on Sep 19, 2019

I believe the P65 is a small engine with 3.5 hp.

Yamaha Boating | Answered on Sep 19, 2019

Contact Lowrance directly to purchase.

Lowrance Boating | Answered on Sep 17, 2019

From the manufacturer/distributor

Boating | Answered on Sep 17, 2019

The trim is usually in the water so once a year would be good.

Boating | Answered on Sep 16, 2019

Here is the link to the manual which explains everything in detail.
Of course you have to have the vector charts that you want installed or ready to install on your system.
Good luck.

Furuno Boating | Answered on Sep 13, 2019

you have an internal ground short/ pos to ground intermittent short.. tearit down and tighten all coonections and lube them.

Minn Kota... | Answered on Sep 13, 2019


Sofina Caribbean... | Answered on Sep 13, 2019

You can search the internet using make and hp to find a serial number range. There should be a placard on the motor. It is in a difficult place to see and many forget it's there. See this video:

Boating | Answered on Sep 12, 2019

Can you contact the seller and complain? There may have been a spacer washer missing. You can always take that sand down the paddle edge that rubs.

Boating | Answered on Sep 12, 2019

you need configuration file save my e-mail address if you still need solution


Boating | Answered on Sep 10, 2019

Best not to do it as you will get maybe 2 mph. Also, I believe it is ******* to modify 1996 and later motors.

Mercury Boating | Answered on Sep 09, 2019

I would start by looking for a wiring problem - loose, corroded, frayed, shorting.......

Simrad Boating | Answered on Sep 05, 2019

Not finding what you are looking for?
Boating Logo

17,742 questions posted

Ask a Question

Usually answered in minutes!

Top Boating Experts

ray gallant

Level 3 Expert

66248 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

30506 Answers

Tom Chichester

Level 3 Expert

55370 Answers

Are you a Boating Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides