Questions & Answers for: replacing water mixer

water very well and soap mixer is not working. does not **** water very well, so it takes the carpets alot longer to dry. Someone told me that maybe the belt needs replaced, but I'm not sure. Also the

Ad

...mixer taps on my bath, hot water tap doesn't work i have regular bog standard mixer taps on my bath, cold water tap works fine, however hot water tap doesn't. It turns but no water flows, any ideas? ...

Ad

...mixer shower and on/off valve is leaking water how do I take out/replace white plastic part to get to the valve? There are 2 valves one above another uper one which is leaking turns on/off water and ...

...mixer tap, water is dripping from the cold tap Use 2 Adjustable Wrenches . you may need a Allen key set to Remove the Mixer unit . You can fix the Water dripping problem may be replacing a O ...

Question about Washing Machines

1 Answer

...water will still fill machine this is caused by a bad mixer valve. ( it is stuck in a open position ). to fix this problem you will need to undue the hoses from the machine and remove the back panel ...

Question about Washing Machines

1 Answer

...water dosen't get hot anymore. The hot and cold inlets are connected correctly thanx sounds like a bad mixer valve -- it could be getting power to the mixer valve but it is stuck and not opening. use ...

Question about Home

1 Answer

...mixer. release the pressure from the tap by opening the tap to let the water out. use a suitable tool to undo the flexible hose from the underside of the tap, there should be a small "O" ring on it ...

...heaters what is wrong with the boiler that causes it to have low hot water pressure. check / replace the washer in the tap into the heater if you have a pre-mixer in the outlet check for failed ...

Methven beta shower mixer rose is leaking Cold water leaking from shower rose of Methven Beta mixer the problem will be at the tap washer replace it and the water will stop from the rose

water has indeed entered the mixer, allow it to dry thoroughly before attempting to use it again. Place the mixer in a warm and dry environment for a few days to ensure all moisture has evaporated. Do

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Anonymous

Level 3 Expert

43501 Answers

Are you a Vacuums Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...