Questions & Answers for: fix for crankshaft

Ad

fire finished it off! I would check the back of your intake manifold for a leak. The combination of fixing the vacuum leak , cam/crankshaft sensors seems to have fixed the problem. GOOD LUCK!!

Ad

way to fix crankshaft slot with out having to have to get a new one?? Also the crankshaft makes a banning noise when i start the engine. please help.. sadly there is no fix but a total new crankshaft

Ad

Question about 1997 LeSabre

1 Answer

...and bolted to the left side of the timing chain cover, partially behind the crankshaft balancer, hope this helps get back to me if you need mre help. please rate my fix as i strive to be the ...

...fix the crankshaft poshing sensor must not be in all the way would this make the car have problems the dash light up like a x-miss tree and the lights cut out help me CRANKSHAFT POSITION SENSOR HAS ...

...Crankshaft position sensor bolt a: 6 N.m (0.6 kg-m, 4.5 lb-fl) - Connect connector and fix wire harness with clamp securely. Thank you for Using FixYa.comKind Regards, LeeYour FixYa Expert and Master ...

Question about 2010 Journey SE

1 Answer

PO017 code on a dodge journey 2009 Could this be fixed by replacing camshaft actuator solenoid valve? P0017 Dodge - Crankshaft-Camshaft Timing Misalignment Bank 1 Sensor 2Possible causes - Engine oil ...

crankshaft sensor is so I can fix it Thanks Wheres the computer on this vehicle fitted is it bolted to the inlet manifold by any chance? the sensor should be front right side level with the crankshaft

...some little pieces around the supports of the crankshaft Hurry up to service, the engine need fixed in both cases, flywhell or crankshaft are vitaly to

Question about 1995 Camry

1 Answer

fix for p1335 code replace air filter Faulty Crankshaft Position Sensor, Crankshaft Position (CKP) Sensor harness is open or shorted or Crankshaft Position (CKP) Sensor circuit poor electrical ...

...crankshaft,is it possible to get tht fixed by engineers as one says hes gonna have to cut a new key slot and completelely cover the old slot it is gonna cost you more to fix it,than to buy a new ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

22486 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...