Questions & Answers for: Plymouth Acclaim fix for crankshaft

Question about 1992 Acclaim

1 Answer

CRANKSHAFT PULLEY CAME OFF HOW HARD IS IT TO FIX A CRANKSHAFT PULLEY ON A 1992 PLYMOUTH ACCLAIM Not a tough job provided shaft etc not damaged.

Ad

how to fix my odometer in 1991 plymouth acclaim The odometer has stayed at 179,000 miles for almost a year. How do i fix it? If the speedometer is working but not the odometer it's in the speedometer ...

Ad

1991 plymouth acclaim, we have to take the dome light fuse out or it will drain the battery. How to fix this problem? Fix the door switch that turns it on.

my friend has a 93 plymouth acclaim and it died while she was driving it on the interstate one day. she tried starting it, but it would only crank and not start. what could be the problem? crankshaft ...

Question about 1991 Acclaim

1 Answer

having trany problems the forward gears do work all the time only when it wants to what can i do to fix the problem Transmissions are tricky, 1991 is an older vehicle so your best bet is to take it to

the cabin. There seem to be plenty of antifreeze in the radiator? most likely stuck thermostat easy fix believe it or not air in system try changing radiator cap.  had same issue on Chevy venture

Question about 1993 Acclaim

1 Answer

I am trying to get my 93 plymouth acclaim back in time. the timing belt broke. where does the distrubutor need to be and the the timing marks so it will be in time? the distributor rotor should be ...

1990 plymouth acclaim wont turn over. battery is good, starter tested good,turn crankshaft by hand and thats good.when you turn the key,all you hear is one click.when i take another battery and a set ...

Question about 1991 Acclaim

1 Answer

car starts to turn over, then stalls right away. seems like it's not getting fuel or air, gas tank is 1/2 full Replace the crankshaft senser.Open curcuit on the one you have now causing this ...

1991 plymoth acclaim 4 cylinder and my serpetine belt keeps sliding off the drive pulley right out of the grooves of the pulley. tention is tight but not over tightened. I have replace the automatic ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...