How do I move a Husqvarna zero turn mower when it won't start? I thought that it had a "neutral" position to roll the machine, but I can't find it in the manual.

Sorry but the simple answer is no, reverse is traditionally set to be slower, if you start adjusting things you will ultimately lose speed forward and probably upset the neutral.

Jan 17, 2018 • Husqvarna 36" Wh3615 Walk Behind Mower...

0helpful

1answer

We just replaced the belt on the deck of our mower. After we reattached the deck, the mower won't start. It won't even turn over. We checked the safety latch on the back of the machine, and it...

First check your battery, it should be around 12.5 volts, if not it is the battery. Because you changed the deck belt, is the mower a manual engaged deck? Make sure the safety switches are working properly. Seat switch, brake switch. When trying to start, do you get 12 volts to the starter? If not, check the 20 amp fuse.

Jan 07, 2018 • Husqvarna Zero Turn Mower Z5426

0helpful

2answers

I just purchased the new Husqvarna MZ6128 Zero Turn. Was dropped at home on Sunday.. with the parking brake on and deck in the traveling mode and handle bars in neutral it will start..when returning the...

Read the manual. These so called "problems" are standard safety features that someone should have gone over with you. Sounds like poor salesmanship. When starting the mower the bars should be out and the park brake pulled. Then disengage the parkbrake and pull the arms in to drive the mower. Do exactly the opposite to get off the mower. I just bought one today every model I looked at was like this.

May 24, 2011 • Husqvarna Zero Turn Mower Z5426

7helpful

3answers

Won,t move

Check the pump.Thanks for asking and I hope this helps out.Please leave me 4 thumbs up.

Jul 20, 2010 • Husqvarna Zero Turn Mower Z5426

4helpful

1answer

Z5426

under the seat should be 2 black adjusting knobs, left and right control arms, these are for adjusting the neutral lock position

Nov 05, 2008 • Husqvarna Zero Turn Mower Z5426

0helpful

2answers

John deere lt120 , 2004

My bet would be a saftey switch. On most riding mowers there are several switches that must be actuated before it will start. First, make sure that blades are disengaged. If there is a handle that engages and disengages them, you might try holding it in the dis-engage position in case the switch is out of adjustment. There is probably one under the seat also. This switch kills everything if you are not sitting in the seat for safety reasons. Also, make sure the parking brake is set, and the gear is in neutral, and not forward or reverse.
Hope some of this helps.
C

Sep 27, 2008 • Husqvarna Zero Turn Mower Z5426

Question 2

woobie dog

Master 1,273 Answers
Posted on Apr 02, 2011

woobie dog

Master

Joined: Jul 05, 2009

Answers

1273

Questions

3

Helped

593181

Points

4197

There is a lever on the back of the machine (yours may have two), down low on the back plate. Pulling the rods out will release the transmission so that the mower may be rolled.
Best regards, (and please rate this solution), --W/D--

Anonymous Apr 02, 2011

W/D - what are you calling the back plate. I lifted the seat and looked underneath, but don't see any rods. I know I did it previously, but that was 7 years ago! Thanks for your help!
woobie dog Apr 02, 2011

Further back, on the rear of the machine. Sometimes the rod(s) are made with notches formed into them, and they slip out of position. --W/D--

×

Related Topics:

How do I move a Husqvarna zero turn mower when it won't start? I thought that it had a "neutral" position to roll the machine, but I can't find it in the manual.

1 Answer

woobie dog

Add Your Answer

Attachments: Added items

Related Questions:

Husqvarna ez5221 zero turn wont move

When parking brake is moved off position, the engine shuts off on my rz5426 zero turn mower.

Parking brake doesn't hold, mower goes into reverse

I have a Husqvavna 4824 zero turn. The Right side drive lever when in the neutral postion tends to fall forward and the the machine starts to turn in counter clockwise circles. Where do I adjust the

How do I adjust the

We just replaced the belt on the deck of our mower. After we reattached the deck, the mower won't start. It won't even turn over. We checked the safety latch on the back of the machine, and it...

I just purchased the new Husqvarna MZ6128 Zero Turn. Was dropped at home on Sunday.. with the parking brake on and deck in the traveling mode and handle bars in neutral it will start..when returning the...

Won,t move

Z5426

John deere lt120 , 2004

Not finding what you are looking for?

Zero Turn Mower Z5426

Husqvarna ez5221 zero turn wont move

Ask a Question

Top Husqvarna Garden Experts

Jay Finke

Sean Wright

Thomas Perkins

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

How do I move a Husqvarna zero turn mower when it won't start? I thought that it had a "neutral" position to roll the machine, but I can't find it in the manual.

1 Answer

woobie dog

Add Your Answer

Attachments: Added items

Related Questions:

Husqvarna ez5221 zero turn wont move

When parking brake is moved off position, the engine shuts off on my rz5426 zero turn mower.

Parking brake doesn't hold, mower goes into reverse

I have a Husqvavna 4824 zero turn. The Right side drive lever when in the neutral postion tends to fall forward and the the machine starts to turn in counter clockwise circles. Where do I adjust the

How do I adjust the

We just replaced the belt on the deck of our mower. After we reattached the deck, the mower won't start. It won't even turn over. We checked the safety latch on the back of the machine, and it...

I just purchased the new Husqvarna MZ6128 Zero Turn. Was dropped at home on Sunday.. with the parking brake on and deck in the traveling mode and handle bars in neutral it will start..when returning the...

Won,t move

Z5426

John deere lt120 , 2004

Not finding what you are looking for?

Zero Turn Mower Z5426

Husqvarna ez5221 zero turn wont move

Related Topics

Ask a Question

Popular Questions

My Husqvarna Hydrostatic transmission is not

How to adjust carb screws on husqvarna 125b blower

Husqvarna chainsaw carburetor adjustment

What are the factory settings high and low on husqvarna 128ld ?

My Husqvarna 128 LD bogs down and quits running

Top Husqvarna Garden Experts

Jay Finke

Sean Wright

Thomas Perkins

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Manuals & User Guides