I have a sanyo remote and a sansui tv how do i program the tv

Hello

I don't have a code for Sansui TV to be programmed with Sanyo remote control But hava a philips Universal remote model which can be programmed for Sanyo TV and has its codes.

Remote Model ===> Philips CL 034 Universal Remote Controller.
Codes
0115 0632

And herealong with I sends some universal remote codes, that you can check it for.

Four Digit Universal remote code for Sansui TV are

0135 0310

Three digit universal remote code for Sansui TV are

135/ 136

Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.