Office Equipment & Supplies Logo

Related Topics:

Bash Freedom Posted on Jan 07, 2020

How to fix SC532 error code for Ricoh C2500 - Ricoh Office Equipment & Supplies

1 Answer

Waleed Ibraheem

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

New Friend:

An expert that has 1 follower.

  • Contributor 65 Answers
  • Posted on Apr 16, 2020
Waleed Ibraheem
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

New Friend:

An expert that has 1 follower.

Joined: Dec 08, 2014
Answers
65
Questions
0
Helped
54537
Points
99

Sc 532 is IH coil fan error. fan motor could be defective .overload on the IH coil fan motor .disconnected harness or defective IOB board

3 Related Answers

Cogz

Chris Coughlin

  • 1326 Answers
  • Posted on Apr 06, 2010

SOURCE: I have a sc532 error code on a Lanier 5228

Try to press these bottons one right after the other... The yellow "C" then the numbers 1 >0 >7 then press and hold the "Clear/Stop" botton till the display changes. Then turn the Main power switch OFF then back ON... I Believe the error code deals with the fixxing unit. If it clears, you may have a power problem in your outlet

Ad

gggg

  • 904 Answers
  • Posted on Jul 04, 2010

SOURCE: Ricoh MP C2500 Error Code SC 561 what is this?

sc561 on an MP C2500 is a thermopile error. The thermopile may need to be replaced, but first make sure it is connected properly and hasn't been moved or loosened.

You'll need to go into service mode and execute SP 5810 in order to clear the sc561 code.

Ramy Hadad

  • 20 Answers
  • Posted on Mar 27, 2018

SOURCE: ricoh C2500 error code SC397

https://www.youtube.com/watch?v=FrUUkZb5lxQ

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Ricoh Aficio MP C2551 A3 Color Laser Multifunction Printer. Hi, I have the SC532 error code on it. I changed all fans but same thing. Please help me.

Question edited for clarity and formatting.

Well it is the correct code for fans, but other parts as well connected to the fan.
  • Code: 532
  • Description: Laser unit fan error
    The motor lock signal error is detected for 10 seconds after the motor lock signal was first detected.
  • Causes:• Defective laser unit fan • Disconnected or defective harness • Defective drive board • Defective BCU
  • Remedy:1. Check or replace the harness. 2. Replace the laser unit fan. 3. Replace the laser unit fan motor. 4. Replace the DRB. 5. Replace the BCU.

Ricoh MPC2551 - Error Code: 532

PrintCopy .info https://printcopy.info > brand=Ricoh > code=532
Code: 532; Description: Laser unit fan error. The motor lock signal error is detected for 10 seconds after the motor lock signal was first detected.

Did you reset the code?

0helpful
1answer

How to replace driver unit fan motor in ricoh aficio mp c2500

without knowing the sc code it will impossible to help because there are more than one fan in mp c2500 each one has different code and different locattion
0helpful
1answer

I have a Ricoh MP C2500 and it shows SC202 error How do I fix this

Replace your polygon mirror motor or complete laser unit if you have one available. Replace this a.s.a.p as it can cause your BICU to pop. If your machine is already dead and you picked the code up on the web browser you need to replace the BICU as well. Do not replace the BICU without replacing the polygon motor. If you do you will pop the BICU again.
0helpful
1answer

What is the solution to this problem aficio mp c2501 sc 532

The fuser not set right, check the connector in machine that the fuser connects into. If it is broken, the harness with that connector needs replacing. The SC532, replace the ventilation fan (at the left side of the machine) motor-front or rear.
0helpful
1answer

How to fix sc532 in mp 4000

call tech fuser needs to be fix before clearing code
0helpful
1answer

Ricoh c2500 sc565 error

could be a number of issues - i would 1st of all clean the thermistors and rest. after this check the belt for any blistering. after this see if the plastic bushings on the heat roller on the belt are clean and functioning. if none of this works id replace the thermistors then the bushings and belt
0helpful
1answer

Codigo sc532 na ricoh 2051

this is a fixing unit error. call for change of this unit by and expert thank you
0helpful
2answers
12helpful
2answers

Ricoh MP C2500 Error Code SC 561 what is this?

sc561 on an MP C2500 is a thermopile error. The thermopile may need to be replaced, but first make sure it is connected properly and hasn't been moved or loosened.

You'll need to go into service mode and execute SP 5810 in order to clear the sc561 code.
Not finding what you are looking for?

1,744 views

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...