I need tradesman model 8100 code is 19D - Tools & Hardware - Others

Sadly we do not supply parts. All I can suggest is you visit a store that sells that tool or go the the manufacturer's website and contact them about replacement parts. You will probably need the serial and model number to make sure you get the correct parts.

Question edited for clarity.
Question moved to model category.

Help in the link

https://www.google.com/search?q=2017+Dodge+RAM+2500+tradesman.+I+need+a+wiring+diagram+for+seat

..

Question edited for full 'make model (what it is)'.
Question moved from Cars and Trucks category.

You will need a multimeter to check the switch and cabling to the socket, and also check if the new bulb is good.

REPLACING THE BULB
1. Use only a 10 watt maximum, candelabra base bulb.
Turn the light switch off and unplug the saw.
2. Remove old bulb. Place new bulb into socket

the manual, just because I found it.

https://www.manualslib.com/manual/865523/Tradesman-Vs4000w.html?page=13#manual

Parts, but everything is obsolete and not stocked

https://www.searspartsdirect.com/model/3659k5i5hi-003127/tradesman-vs4000w-scroll-saw-parts

..

broken shaft not many places would have this but a salvage yard

Contact Sears to request assistance.

888.873.3829

M-F 6:30 a.m. - 10:00 p.m. Central Time (United States)
Sat 7:00 a.m. - 9:00 p.m. CT
Sun 7:30 a.m. - 9:00 p.m. CT

https://www.searspartsdirect.com/model-number/8031/3127/0744600.html

Model 8031 Tradesman BENCH TABLE SAW Parts

Unlock code at a free of cost is not possible for your mobile but you do not worry about this one you can get a code at a reasonable cost itself..........
Get the unlock code for your blackberry pearl 8100 model mobile here Mobile-unlocker.com , it gives the easy instructions for getting the code for your mobile at a safe way......

here
http://www.mobileunlocksolutions.com/blackberry-8100/rs1wp9/
you can get your blackberry 8100 model mobile unlocked at very low cost , with full secure & safe..

I have the manual, If you still need it, It says not to attempt oiling the motor bearing or service the the motor.

Hi Jim, See you have been looking for awhile and understandably so. I don't have a manual and don't know anyone that does. Tradesman tools are manufactured by Rexon Corp. and they have a US office. I do not know where you are located so I have included the necessary information for you to contact them and try to get your manual.
Rexon Corporation
684 Huey Road Rock Hill, SC 29730 U.S.A. Tel: 1-803-980-7740
Fax: 1-803-980-7750
Http://www.tradesman-rexon.com
E-mail: [email protected]
Good Luck, This should Fixya!

I believe I have the manual for the 8031 table saw. Are you still looking? Contact me at [email protected]