Desa International Tools & Hardware - Others - Recent Questions, Troubleshooting & Support

No spring needed
Turn staplegun upside down. At
rear of tool, squeeze latch on
end of staple channel (see Fig-
ure 4). Pull staple channel cover
out of staple channel until it stops
(see Figure 4).
3. Drop staples into staple
channel. Make sure staple
points are facing up (see
Figure 4).
4. Slide staple channel cover
back into staple channel until it

Sure, you can purchase them on amazon, here: Aurora Smart Technology JamFree Paper Shredder I hope this was Helpful. Cheers

You push a tab and a portion slides out. The piece that slides out looks like you would mount the staples and just slide it back in. But that isn't how it works. Instead, you simply place the staples {pointy side up} in the spot where the portion slid out. You slide the portion back in over the staples. I've attached a pic, that shows the staples in the correct spot. Hope this helped, this boggled me for a few days until I figured it out.

To buy staples for the Swingline 800:

Sears, 3/8" is part # 74418 1/2#" is part # 74419 (In a small red and black Sears Craftsman Staple Package OR www.ebay.com or www.amazon.com Part numbers to search for are Surebonder #5 staples. They are available in 5 leg lengths as follows: 44038 = 3/8" 44014 = 1/4" 44012 = 1/2" 44516 = 5/16" 44916 = 9/16" They will work!

Hi I have just bought some from Ebay BIC Warehouse Shop £6.40 for 1 each 1/4 and 3/8. Free postage to UK from USA. Stanley TRC604T

Turn Stapler over.