Drills - Recent Questions, Troubleshooting & Support


try a local retailer or online store

Hilti Drills | Answered on Jan 20, 2020


brushless? or brush motor? could be the brushes are worn

Speed Drills | Answered on Jan 06, 2020


You need to know the hole diam. where the key goes and the max size for the chuck. 1/2 3/8 Grainger has your key when you know what to order.

Drills | Answered on Dec 30, 2019


broken shaft not many places would have this but a salvage yard

Drills | Answered on Dec 30, 2019


Found Ryobi P505 18v battery. Compare it to what you already have. Stores have other brands if this does not match. Was listed at The Home Depot.

Drills | Answered on Dec 30, 2019


lots of WD-40 double channel locks and strong person. work it a little at a time to avoid damage.

Drills | Answered on Dec 30, 2019


similar to mine so find out the thread going into the shaft and order either the 3/8 or 1/2 to suit your needs.

Craftsman Drills | Answered on Dec 30, 2019


it is possible that a chuck is spun on if it has fine threads. most likely if the chuck is frozen you would have to use spanner on key hole and put the outer ring in a vise. It should loosen up. Sometimes I use a pipe wrench and the large channel locks to spin the chuck open. Most have a screw but it can get rounded over which would require drilling it out.

Drills | Answered on Dec 30, 2019


Test the batteries with a multimeter that will tell you if the batteries are shot. You can do the same with the charger, test it with a multimeter but I don't recommend it unless you know what you are doing because you will be live testing it.
Ryobi belt sander https://toolinspector.com/best-belt-sander/

/uploadswith image

Craftsman Drills | Answered on Dec 22, 2019


Take the old pulley to a shop where they sell pulleys and try to match it up. I did that with my lawn tractor and found one that worked.

Delta Machinery... | Answered on Dec 17, 2019

Not finding what you are looking for?
Drills Logo

11,637 questions posted

Ask a Question

Usually answered in minutes!

Top Drills Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Brad Brown

Level 3 Expert

18157 Answers

john h

Level 3 Expert

22486 Answers

Are you a Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...