Give me the solution for my canon image runner 2520 photocopier which shows error code e000002?

Rotation of main motor is irregular, possible main motor defective or dc controller board defective

First clear that error from service mode

Unplug the printer let it sit for one minute than power it back up. If the error doesn't clear repost.

I’m happy to help further over the phone at https://www.6ya.com/expert/joshua_ac64e182ed26f66d

ERROR CODE E000002 IR 2545

In my experience the 804 error code relates to the location/availability of a file. If you are trying to print/access a particular file check the path and make sure you have permission to access it.

This code relates to the fixing unit, needs replacing

canon ir 2525 errer coad is E000002 how can reset the machine

e000020 is error with toner unit,
several possibility :
- The toner is empty
- The developer failsto be replenished with starter developer properly.
- Related developing unit
- Ahopper motor error is identified by the detail code of E020. However, it may be identified by E02x according to need.

E002A start-up fault is detected under any of the following conditions of the main thermistor (start-up detection fault):
after exceeding 40°C, it fails to reach 60°C within 10 sec.
after exceeding 60°C, it fails to reach 80°C within 10 sec.
. . .
after exceeding 180°C, it fails to reach 195°C within 10 sec.

press *28*
<functions>
press "clear"
"error"
<Ok>
then off the main unit and on it