HOW DO I ROTATE MY SCREEN USING SHORT-CUT KEYS

It sounds to me a broken circuit,in solenoid cut out,.. if i was u id replace with a new wire i had to do this in the past, hope this helps

Deirdre,

The key combination to rotate the screen back to normal is: Ctrl+Alt+Up Arrow

If you use Ctrl+Alt+Arrow keys - whichever arrow key you press is the direction that the screen should rotate.

Hope that helps!

The F keys are function keys. They are basically shortcuts to common functions such as F1 in most applications will open a Help screen. Most browsers use F11 or F12 to go to Full Screen. Most of the keys have no function assigned to them. Also, when booting up, pressing and holding F5 will provide boot options such as Safe Mode to diagnose problems.

In order to reduce/enlarge the image, try feeding the paper short edge from the cassete

You dont get worry.The problem will be solve.

• Go to Control Panel.
• Open the VGA Card Properties (for example if you motherboard is intel then open the Intel Extreme Graphic.
• After this Click on Rotation Tab.
• And then You change from here.

Short Keys of Intel Motherboard for rotation.

• Rotate Normal (<Ctrl> <Alt> Up)
• Rotate 90 Degree (<Ctrl> <Alt> Left)
• Rotate 180 Degree (<Ctrl> <Alt> Down)
• Rotate 270 Degree (<Ctrl> <Alt> Right)

Print Screen key Press the "F" key and the "P" key

http://www.bigkeys.com/faq.asp

Sometimes when the right click options do not work, you can revert to the old DOS command short cuts. I am unsure of the Fn + "F" key stroke to take a screen shot but the keyboard short cuts for copy, cut and paste are: copy is Ctrl + C, Cut is Ctrl + X, Paste is Ctrl + V

Dear Sir,

For getting display in TV you have to select input source as TV generally in all other laptop
short cut key is fn+f4. generally short cut function key shows picture of small square box.Search for that short key then activate the out put for TV by pressing that key with Fn keys.

I think it solves your problem.

good luck

you can try googling your keyboards brand and you will most likely need to download software to set up your short cut keys.

did you try pushing the input key on your remote it might change the screen if that don't work then try to go in to the settings in the remote