How to set belkin admin password - Belkin Computers & Internet

If you are asking what the default credentials are to log into the admin panel of the router, then the options are below.

Default usernames: admin, Admin, [blank]
Default passwords: admin, password, [blank]

If you are asking for the Wi-Fi password, that is unique to the user who initially set it up. You can reset the router but following the manufacturer instructions and holding the reset button down in the back. This will erase all settings on the router.

The default login information for Belkin routers depends on the model as shown below.

• Default user names: admin, or none
• Default passwords: none - Belkin ships its routers with no administrator password set.
  
  http://compnetworking.about.com/od/homeroutersetup/qt/belkin-router-default-passwords.htm

Check on the underside of the unit, there may be a sticker with your SSID on it. If you need to you can also reset the password back to the factory default by holding down the reset button. You can also download the instruction manual from here:

http://www.belkin.com/IWCatProductPage.process?Product_Id=509868

Would you kindly rate my answer please if this has helped resolve the problem - thanks :)

http://www.belkin.com/ca/support/product/?lid=enc&pid=F5D7230-4&scid=221
If you need your default password it usually, is LOGIN: admin PASSWORD: admin. But please download your user manual, and it is all in there.If you simply cannot remember, one that you have entered, then you simply need to reset the router, it's in the manual, and then use the default, admin admin to login and password. then you can set it all up again, this time save your password.

Connect your router to computer with ethernet cable.
Then default link for belkin router is
http://192.168.15.1
type it in internet explorer then you can see configuration page of router.
Then type user as "admin" and password as "admin" or blank or "password"

If you are not able to access your router with above info then you need to RESET it.
For that press RESET button it is in back panel of router press it for 10 seconds then all settings goes to factory defaults.
Then you can access it with above .
Then click on wireless settings and enable WEP security add WEP code it is your password to connect wi fi.
Then save and restart router.
Then check.

You can adjust MTU from within the Belkin Router administrative console. You really should not be changing it unless your current ISP gives you a specific MTU setting, otherwise you could disrupt internet connectivity.


Default IP address: http://192.168.2.1
Default admin username: Administrator
Default admin password: <blank>
Be sure to set a password for your router!

This is the address where you change MTU
192.168.2.1/wan_pppoe.html


Belkin Wireless G User Manual:
http://www.belkin.com/support/article/?lid=en&pid=F5D7230-4&aid=5999&scid=221



Windows Tools to adjust MTU:

DrTCP tool:
http://www.dslreports.com/drtcp

TCP Optimizer
http://www.speedguide.net/downloads.php

Use the reset button near where the AC adapter plugs in. Hold it in for at least ten seconds. This should set it back to factory, allowing you to set another password.

What is the brand of the router your using? This information will be from the router that you have. Use a wired connection from the router,check your default gateway (ipconfig) and type that numbers in your address bar. You will be able to access your set-up page, look for wireless tab and look for wireless security. You will see there your WEP key.

If you have the router, the default username and password is usually printed on the bottom if not try these.

Username | Password
Admin (none)
Administrator (none)
Admin password
Administrator password
Admin admin
Administrator admin


try these in any order and switch round passwords to usernames these are the default passwords, if these dont work, then a simple push button reset will sort you out.

Ben.